Abstract:Thermoelectric selenides have attracted more and more attentions recently. Herein, p-type SnSe polycrystalline bulk materials with good thermoelectric properties are presented. By using the SnSe2 nanostructures synthesized via a wetchemistry route as the precursor, polycrystalline SnSe bulk materials were successfully obtained by a combined heattreating process under reducing atmosphere and following spark plasma sintering procedure. As a reference, the SnSe nanostructures synthesized via a wet-chemistry route were also fabricated into polycrystalline bulk materials through the same process. The thermoelectric properties of the SnSe polycrystalline transformed from SnSe2 nanostructures indicate that the increasing of heattreating temperature could effectively decrease the electrical resistivity, whereas the decrease in Seebeck coefficient is nearly invisible. As a result, the maximum power factor is enhanced from 5.06 x 10(-4) W/m.K-2 to 8.08 x 10(-4) W/m.K-2 at 612 degrees C. On the other hand, the reference sample, which was obtained by using SnSe nanostructures as the precursor, displays very poor power factor of only 1.30 x 10(-4) W/m.K-2 at 537 degrees C. The x-ray diffraction (XRD), scanning electron microscope (SEM), x-ray fluorescence (XRF), and Hall effect characterizations suggest that the anisotropic crystal growth and existing Sn vacancy might be responsible for the enhanced electrical transport in the polycrystalline SnSe prepared by using SnSe2 precursor. On the other hand, the impact of heat-treating temperature on thermal conductivity is not obvious. Owing to the boosting of power factor, a high zT value of 1.07 at 612 degrees C is achieved. This study provides a new method to synthesize polycrystalline SnSe and pave a way to improve the thermoelectric properties of polycrystalline bulk materials with similar layered structure.

Independently Tuning the Power Factor and Thermal Conductivity of SnSe Via Ag2S Addition and Nanostructuring

Enhancement of Thermoelectric Performance of Layered SnSe2 by Synergistic Modulation of Carrier Concentration and Suppression of Lattice Thermal Conductivity

High Thermoelectric Performance in Polycrystalline SnSe Via Dual‐Doping with Ag/Na and Nanostructuring with Ag8SnSe6

Enhanced thermoelectric properties of p-type polycrystalline SnSe by regulating the anisotropic crystal growth and Sn vacancy

Dynamical Ag-Intercalation with AgSnSe2 Nano-Precipitates in Cl-Doped Polycrystalline SnSe2 toward Ultra-High Thermoelectric Performance

Realizing High Thermoelectric Performance in Polycrystalline SnSe Via Silver Doping and Germanium Alloying

Achieving high thermoelectric performance with Pb and Zn codoped polycrystalline SnSe via phase separation and nanostructuring strategies

Synthesis of SnSe 1– x S x Polycrystals with Enhanced Thermoelectric Properties Via Hydrothermal Methods Combined with Spark Plasma Sintering

Realizing High Thermoelectric Performance of Ag/Al Co‐Doped Polycrystalline SnSe through Band Structure Modification and Hydrogen Reduction

Synergistically Optimized Electrical and Thermal Transport Properties of Polycrystalline SnSe Via Alloying SnS

Polycrystalline NiSe-Alloyed SnSe with Improved Medium-Temperature Thermoelectric Performance

Polycrystalline SnSe–Sn1–vS Solid Solutions: Vacancy Engineering and Nanostructuring Leading to High Thermoelectric Performance

Synthesis and Thermoelectric Properties of Ag-Doped Snse

Three‐Stage Inter‐Orthorhombic Evolution and High Thermoelectric Performance in Ag‐Doped Nanolaminar SnSe Polycrystals

Ag Interstitial Inhibition and Phonon Scattering at the ZnSe Nano-Precipitates to Enhance the Thermoelectric Performance of Ag 2 Se

Attaining Enhanced Thermoelectric Performance in P-Type (snse)1–(sns2) Produced Via Sintering Their Solution-Synthesized Micro/nanostructures

Extremely Low Thermal Conductivity and Enhanced Thermoelectric Performance of Polycrystalline SnSe by Cu Doping

High Thermoelectric Figure of Merit ZT > 1 in SnS Polycrystals

Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal

Enhanced thermoelectric performance of highly oriented polycrystalline SnSe based composites incorporated with SnTe nanoinclusions

Boosting Thermoelectric Performance of SnSe Via Tailoring Band Structure, Suppressing Bipolar Thermal Conductivity, and Introducing Large Mass Fluctuation.