Abstract:Thermoelectric selenides have attracted more and more attentions recently. Herein, p-type SnSe polycrystalline bulk materials with good thermoelectric properties are presented. By using the SnSe2 nanostructures synthesized via a wetchemistry route as the precursor, polycrystalline SnSe bulk materials were successfully obtained by a combined heattreating process under reducing atmosphere and following spark plasma sintering procedure. As a reference, the SnSe nanostructures synthesized via a wet-chemistry route were also fabricated into polycrystalline bulk materials through the same process. The thermoelectric properties of the SnSe polycrystalline transformed from SnSe2 nanostructures indicate that the increasing of heattreating temperature could effectively decrease the electrical resistivity, whereas the decrease in Seebeck coefficient is nearly invisible. As a result, the maximum power factor is enhanced from 5.06 x 10(-4) W/m.K-2 to 8.08 x 10(-4) W/m.K-2 at 612 degrees C. On the other hand, the reference sample, which was obtained by using SnSe nanostructures as the precursor, displays very poor power factor of only 1.30 x 10(-4) W/m.K-2 at 537 degrees C. The x-ray diffraction (XRD), scanning electron microscope (SEM), x-ray fluorescence (XRF), and Hall effect characterizations suggest that the anisotropic crystal growth and existing Sn vacancy might be responsible for the enhanced electrical transport in the polycrystalline SnSe prepared by using SnSe2 precursor. On the other hand, the impact of heat-treating temperature on thermal conductivity is not obvious. Owing to the boosting of power factor, a high zT value of 1.07 at 612 degrees C is achieved. This study provides a new method to synthesize polycrystalline SnSe and pave a way to improve the thermoelectric properties of polycrystalline bulk materials with similar layered structure.

Cold Sintering Mediated Engineering of Polycrystalline SnSe with High Thermoelectric Efficiency

Enhancement of Thermoelectric Performance of Layered SnSe2 by Synergistic Modulation of Carrier Concentration and Suppression of Lattice Thermal Conductivity

Enhanced thermoelectric properties of p-type polycrystalline SnSe by regulating the anisotropic crystal growth and Sn vacancy

Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal

Achieving high thermoelectric performance with Pb and Zn codoped polycrystalline SnSe via phase separation and nanostructuring strategies

Lattice Strain Leads to High Thermoelectric Performance in Polycrystalline SnSe

Realizing High Thermoelectric Performance of Polycrystalline SnS Through Optimizing Carrier Concentration and Modifying Band Structure

Polycrystalline NiSe-Alloyed SnSe with Improved Medium-Temperature Thermoelectric Performance

Introducing PbSe quantum dots and manipulating lattice strain contributing to high thermoelectric performance in polycrystalline SnSe

Synthesis of SnSe 1– x S x Polycrystals with Enhanced Thermoelectric Properties Via Hydrothermal Methods Combined with Spark Plasma Sintering

High thermoelectric properties in polycrystalline SnSe materials realized by rare earth halide Co-doping

Realizing High Thermoelectricity in Polycrystalline Tin Sulfide Via Manipulating Fermi Surface Anisotropy and Phonon Dispersion

Dynamical Ag-Intercalation with AgSnSe2 Nano-Precipitates in Cl-Doped Polycrystalline SnSe2 toward Ultra-High Thermoelectric Performance

Optimization of Sodium Hydroxide for Securing High Thermoelectric Performance in Polycrystalline Sn1 − Xse Via Anisotropy and Vacancy Synergy

Heavy Rare Earth Element Gd Enhancing Thermoelectric Performance in p-Type Polycrystalline SnSe via Optimizing Carrier Transport and Density of States

Achieving High Thermoelectric Figure of Merit in Polycrystalline SnSe Via Introducing Sn Vacancies

Rock-salt-type nanoprecipitates lead to high thermoelectric performance in undoped polycrystalline SnSe

A Solvothermal Synthetic Environmental Design for High‐Performance SnSe‐Based Thermoelectric Materials

Defect Engineering in Solution-Processed Polycrystalline SnSe Leads to High Thermoelectric Performance

Attaining Enhanced Thermoelectric Performance in P-Type (snse)1–(sns2) Produced Via Sintering Their Solution-Synthesized Micro/nanostructures

Independently Tuning the Power Factor and Thermal Conductivity of SnSe Via Ag2S Addition and Nanostructuring