Abstract:Coal liquefaction residue (CLR) has a high content of carbon and organic substances. However, sulfur and inorganics pose a challenge for the high-value-added utilization of CLR. In this work, general-purpose carbon fiber was successfully prepared by the new method of chlorination–dechlorination using CLR as raw material and benzyl chloride as chlorinating agent. The effect of benzyl chloride addition amount on the property of isotropic pitch precursor and the performance of general-purpose carbon fiber were investigated. The results showed that the as-prepared pitch precursors were dominated by carbon elements and contained small numbers of hydrogen, oxygen, nitrogen, and sulfur. The characteristic peaks generated from chlorine elements were observed in both FTIR and XPS spectra. The peaks at the wavenumbers of 1490 cm −1 and 696 cm −1 corresponded to the vibration of C–Cl bond, and a tiny Cl 2p peak located at 200.0 eV was observed by reducing the noise of XPS spectra. It indicates that the trace chlorine remains in the as-synthesized isotropic pitch precursor even after undergoing dechlorination. The molecular compositions of isotropic pitches were mainly polyaromatic hydrocarbons, and the chlorination–dechlorination promotes the oligomerization of polyaromatic hydrocarbons to form dimers and trimers. Therefore, the polycondensed degree and carbon aromaticity were improved. It is known from 13 C NMR analysis that the effect of chlorine–dechlorination makes the molecular structure of pitches transform more linear, thus enhancing their spinnability. In addition, the higher the amount of benzyl chloride added, the better the property of isotropic pitch was. The pitch of BC-30 and BC-40 showed excellent spinnability, stabilized property, and carbonized property compared to other pitches. The morphology of obtained carbon fiber was homogeneous and smooth without defects in surface and section. The as-prepared general-purpose carbon fiber demonstrated good tensile strength up to 1220 MPa with an average diameter of 8.5 μm.

Preparation and Characterization of High Softening Point and Homogeneous Isotropic Pitches Produced from Distilled Ethylene Tar by a Novel Bromination Method

Facile Synthesis of Novel HTPBs and EHTPBs with High Cis-1,4 Content and Extremely Low Glass Transition Temperature

Effects of Bromination-Dehydrobromination on the Microstructure of Isotropic Pitch Precursors for Carbon Fibers

SYNTHESIS OF AROMATIC POLYESTERS FROM ESTERS OF DIPHENOLIC ACID AND ISOPHTHALOYL CHLORIDE BY INTERFACIAL POLYCONDENSATION

Controllable Preparation of Spinnable Isotropic Pitches for Carbon Fibers with High Tensile Strength from Low-Cost Ethylene Tar Pitch by a Selective Photobromination–debromination Method

Controllable synthesis of isotropic pitch precursor for general purpose carbon fiber using waste ethylene tar via bromination–dehydrobromination

Preparation of pitch precursor with excellent spinnability for general-purpose carbon fibre using coal tar pitch as raw material

Synthesis and Structural Evolution of Coal-Based Mesophase Pitch by Hydrogenation-Vacuum Thermal Polycondensation Process

Preparation of ultrahigh molecular weight ethylene/1-octene block copolymers using ethylene pressure pulse feeding policies

Influence of boron trifluoride complex addition on structure and composition of mesophase pitch from FCC decant oil via two-stage thermotreatment

Preparation and Properties of Organic Palygorskite SBR/organic Palygorskite Compound and Asphalt Modified with the Compound

Controllable synthesis of a carbonaceous pitch from molecular dimension by a novel method of chlorination-dechlorination

Modified effect on properties of mesophase pitch prepared from various two-stage thermotreatments of FCC decant oil

Evaluating of the oxidative behaviors of isotropic pitch fractions for optimal the mechanical properties of isotropic pitch-based carbon fibers

Preparation of Mesophase Pitch with Fine-Flow Texture from Ethylene Tar/Naphthalene by Catalytic Synthesis for High-Thermal-Conductivity Carbon Fibers

Polymerization kinetics and control of the components of a mesophase pitch

Structure and composition of mesophase pitch prepared from aromatic‐rich fluid catalytic cracking slurry under different process conditions

The effect of hydrogenation degree on the properties of coal-based spinnable mesophase pitch

Preparation of plastic anisotropic pitches from products of heat treatment of heavy tar from pyrolysis of hydrocarbon raw materials

Chlorination–dechlorination of coal liquefaction residue using benzyl chloride for general-purpose carbon fiber synthesis

Reformation of Naphtha Cracking Bottom Oil for the Preparation of Carbon Fiber Precursor Pitch