Abstract:Coal liquefaction residue (CLR) has a high content of carbon and organic substances. However, sulfur and inorganics pose a challenge for the high-value-added utilization of CLR. In this work, general-purpose carbon fiber was successfully prepared by the new method of chlorination–dechlorination using CLR as raw material and benzyl chloride as chlorinating agent. The effect of benzyl chloride addition amount on the property of isotropic pitch precursor and the performance of general-purpose carbon fiber were investigated. The results showed that the as-prepared pitch precursors were dominated by carbon elements and contained small numbers of hydrogen, oxygen, nitrogen, and sulfur. The characteristic peaks generated from chlorine elements were observed in both FTIR and XPS spectra. The peaks at the wavenumbers of 1490 cm −1 and 696 cm −1 corresponded to the vibration of C–Cl bond, and a tiny Cl 2p peak located at 200.0 eV was observed by reducing the noise of XPS spectra. It indicates that the trace chlorine remains in the as-synthesized isotropic pitch precursor even after undergoing dechlorination. The molecular compositions of isotropic pitches were mainly polyaromatic hydrocarbons, and the chlorination–dechlorination promotes the oligomerization of polyaromatic hydrocarbons to form dimers and trimers. Therefore, the polycondensed degree and carbon aromaticity were improved. It is known from 13 C NMR analysis that the effect of chlorine–dechlorination makes the molecular structure of pitches transform more linear, thus enhancing their spinnability. In addition, the higher the amount of benzyl chloride added, the better the property of isotropic pitch was. The pitch of BC-30 and BC-40 showed excellent spinnability, stabilized property, and carbonized property compared to other pitches. The morphology of obtained carbon fiber was homogeneous and smooth without defects in surface and section. The as-prepared general-purpose carbon fiber demonstrated good tensile strength up to 1220 MPa with an average diameter of 8.5 μm.

Controllable synthesis of a carbonaceous pitch from molecular dimension by a novel method of chlorination-dechlorination

Chlorination–dechlorination of coal liquefaction residue using benzyl chloride for general-purpose carbon fiber synthesis

Mechanism and application of halogenation–dehalogenation in the development of pitch-based carbon fiber: A review

Synthesis and Structural Evolution of Coal-Based Mesophase Pitch by Hydrogenation-Vacuum Thermal Polycondensation Process

Effect of isopropyl chloride addition in AlCl 3 catalytic system on the formation of coal tar pitch-based mesophases

Tuning the carbon morphology by pyrolysis in AlCl3–NaCl molten salt from coal tar pitch

Preparation of pitch precursor with excellent spinnability for general-purpose carbon fibre using coal tar pitch as raw material

Effects of Bromination-Dehydrobromination on the Microstructure of Isotropic Pitch Precursors for Carbon Fibers

Controllable synthesis of isotropic pitch precursor for general purpose carbon fiber using waste ethylene tar via bromination–dehydrobromination

Preparation of Mesophase Pitch with Fine-Flow Texture from Ethylene Tar/Naphthalene by Catalytic Synthesis for High-Thermal-Conductivity Carbon Fibers

Co‐Carbonization of Medium‐ and Low‐Temperature Coal Tar Pitch and Coal‐Based Hydrogenated Diesel Oil Prepare Mesophase Pitch for Needle Coke Precursor

Changes in structure of coal liquefied pitch during liquid-phase carbonization process

Evaluating of the oxidative behaviors of isotropic pitch fractions for optimal the mechanical properties of isotropic pitch-based carbon fibers

Modified effect on properties of mesophase pitch prepared from various two-stage thermotreatments of FCC decant oil

Structure and composition of mesophase pitch prepared from aromatic‐rich fluid catalytic cracking slurry under different process conditions

The effect of hydrogenation degree on the properties of coal-based spinnable mesophase pitch

Spinnable Mesophase Pitch Prepared via Co-carbonization of Fluid Catalytic Cracking Decant Oil and Synthetic Naphthalene Pitch

Synthesis of needle coke by co-carbonization of coal liquefaction pitch and refined soft pitch

Preparation of Mesophase Pitch through Supercritical Fluid Extraction of Coal Tar Pitch

Controllable Preparation of Spinnable Isotropic Pitches for Carbon Fibers with High Tensile Strength from Low-Cost Ethylene Tar Pitch by a Selective Photobromination–debromination Method

Mechanism of coal pitch pre-hydrogenation catalyzed by metal-free catalytic system and preparation of mesophase pitch