Abstract:Coal liquefaction residue (CLR) has a high content of carbon and organic substances. However, sulfur and inorganics pose a challenge for the high-value-added utilization of CLR. In this work, general-purpose carbon fiber was successfully prepared by the new method of chlorination–dechlorination using CLR as raw material and benzyl chloride as chlorinating agent. The effect of benzyl chloride addition amount on the property of isotropic pitch precursor and the performance of general-purpose carbon fiber were investigated. The results showed that the as-prepared pitch precursors were dominated by carbon elements and contained small numbers of hydrogen, oxygen, nitrogen, and sulfur. The characteristic peaks generated from chlorine elements were observed in both FTIR and XPS spectra. The peaks at the wavenumbers of 1490 cm −1 and 696 cm −1 corresponded to the vibration of C–Cl bond, and a tiny Cl 2p peak located at 200.0 eV was observed by reducing the noise of XPS spectra. It indicates that the trace chlorine remains in the as-synthesized isotropic pitch precursor even after undergoing dechlorination. The molecular compositions of isotropic pitches were mainly polyaromatic hydrocarbons, and the chlorination–dechlorination promotes the oligomerization of polyaromatic hydrocarbons to form dimers and trimers. Therefore, the polycondensed degree and carbon aromaticity were improved. It is known from 13 C NMR analysis that the effect of chlorine–dechlorination makes the molecular structure of pitches transform more linear, thus enhancing their spinnability. In addition, the higher the amount of benzyl chloride added, the better the property of isotropic pitch was. The pitch of BC-30 and BC-40 showed excellent spinnability, stabilized property, and carbonized property compared to other pitches. The morphology of obtained carbon fiber was homogeneous and smooth without defects in surface and section. The as-prepared general-purpose carbon fiber demonstrated good tensile strength up to 1220 MPa with an average diameter of 8.5 μm.

Tuning the carbon morphology by pyrolysis in AlCl3–NaCl molten salt from coal tar pitch

Effect of isopropyl chloride addition in AlCl 3 catalytic system on the formation of coal tar pitch-based mesophases

Low-Temperature Solvothermal Method for Coal Tar-Based Carbonaceous Mesophase Preparation and Its Excellent Performance

Preparation and Characterization of Mesocarbon Microbeads by the Co-Polycondensation of High-Temperature Coal Tar Pitch and Coal Pyrolytic Extracts

Controllable synthesis of a carbonaceous pitch from molecular dimension by a novel method of chlorination-dechlorination

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Fundamental understanding of structure evolution in the synthesis of hard carbon from coal tar pitch for high-performance sodium storage

Preparation of mesocarbon microbeads from coal tar pitch with blending of biomass tar pitch

Structure and composition of mesophase pitch prepared from aromatic‐rich fluid catalytic cracking slurry under different process conditions

Mesophase formation of coal-tar pitches used for impregnant of C/C composites

Synthesis of mesocarbon microbeads from high‐temperature coal tar pitch: Effects of quinoline insoluble

Effect of coal tar pitch as carbon source on the electrochemical performance of silicon-carbon composites

Tracking and Analyzing the Structures and Morphologies of Mesocarbon Microbeads (mcmbs) in Air Oxidation Process

In Situ Fabrication of Carbon Nanotube/Mesocarbon Microbead Composites from Coal Tar Pitch

Design and structure optimization of coal-based hierarchical porous carbon by molten salt method for high-performance supercapacitors

Pitch-based 3D tremella-like porous carbon with cavitary structures: Applications in symmetric capacitors and zinc ion capacitors

Co‐Carbonization of Medium‐ and Low‐Temperature Coal Tar Pitch and Coal‐Based Hydrogenated Diesel Oil Prepare Mesophase Pitch for Needle Coke Precursor

Gas Phase‐Heat Absorption‐Condensate Phase Stepwise Flame Retardant Strategy to Prepare Coal Tar Pitch‐Based Porous Carbon for Supercapacitor

Molecular structure effects of mesophase pitch and isotropic pitch on morphology and properties of carbon nanofibers by electrospinning

Molecular representation and atomic-level coking evolution investigation of modified coal tar pitch via 13 C NMR, MALDI-TOF-MS, SAXS, and ReaxFF MD

Chlorination–dechlorination of coal liquefaction residue using benzyl chloride for general-purpose carbon fiber synthesis