Abstract:Si is regarded as a next-generation anode material for high-energy density lithium-ion batteries (LIBs). However, Si-based anode materials cause intractable problems that result in ceaseless capacity decay and poor cyclic performance. In this study, two types of industrial wastes, Si powder (from the photovoltaic industry) and pitch (from petroleum residue), were selected as the active material and carbon source, respectively, for preparing a Si single-walled carbon nanotube (SWCNT)-embedded carbon composite. A good conductive pathway was created by the SWCNTs, and the inner voids in the composite increased its conductivity and provided extra space for accommodating the volume expansion of lithiated Si. In addition, a porous pitch-based spherical composite with embedded Si and SWCNTs was fabricated through a designed one-step process using a combination of the spray-drying and antisolvent precipitation techniques and a series of thermal treatments. The cycling test results revealed that the composite showed the high reversible specific capacities of 2001 mAh g<sup>–1</sup> at 1 A/g (0.5 C) with a retention of 66.1% and 1682 mAh g<sup>–1</sup> at 1 A/g (0.5 C) with a retention of 55.6% after the 100th and 200th cycles, respectively. These results imply that the pitch-derived soft carbon and SWCNTs provided an excellent conductivity, and the porous structure of the composite accommodated the stress produced by the Si expansion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c01084?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c01084</a>.SEM images of as-sprayed particles synthesized with different parameters, silicon fragments and raw SWCNTs, particle size distributions, TGA analysis of the pitch, cycling performance of Si/ with different conductive additives, with different weight percentages of FEC, micro-Si, and Si/ (pitch-Si (2-1)), and the equivalent electrical circuit model of Si/ (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c01084/suppl_file/ef1c01084_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of coal tar pitch as carbon source on the electrochemical performance of silicon-carbon composites

Effect of iodine treatment on structural and electrochemical performance of coal tar pitch based carbon materials for sodium ion batteries

Scalable synthesis of porous graphite/silicon@pitch carbon nanocomposites derived from wastes of silica fume for high-performance lithium storage

Effect of Sulfur Modification on Structural and Electrochemical Performance of Pitch-Based Carbon Materials for Lithium/Sodium Ion Batteries

Fundamental understanding of structure evolution in the synthesis of hard carbon from coal tar pitch for high-performance sodium storage

Optimal microstructural design of pitch-derived soft carbon shell in yolk-shell silicon/carbon composite for superior lithium storage

Silicon Single Walled Carbon Nanotube-Embedded Pitch-Based Carbon Spheres Prepared by a Spray Process with Modified Antisolvent Precipitation for Lithium Ion Batteries

Mechanism and application in lithium ion batteries of ferrocene catalyzed coal tar pitch to prepare fibrous carbon material with soft and hard carbon hybrid structure

Pitch modified hard carbons as negative materials for lithium-ion batteries

Green Synthesis of Hierarchically Porous Carbon Derived from Coal Tar Pitch for Enhanced Lithium Storage

Highly graphitized coal tar pitch-derived porous carbon as high-performance lithium storage materials.

Dynamic Co-calcination Enhances the Industrial Application of Si–C/Graphite Composites with Uniform Strain Distribution

Investigation of the soft carbon microstructure in silicon/carbon anodes for superior lithium storage

Preparation of layered-porous carbon from coal tar pitch narrow fractions by single-solvent extraction for superior cycling stability electric double layer capacitor application

N/O Co-doped Porous Carbons Derived from Coal Tar Pitch for Ultra-high Specific Capacitance Supercapacitors.

Electrochemical Characteristics of Pitch Coated Silicon/Graphite Anode Composites Using Surface Modification Process

Si/C Composites for High Capacity Lithium Storage Materials

The Effect of Binder on the Electrochemical Property of Silicon/carbon Anode

Optimizing the carbon coating to eliminate electrochemical interface polarization in a high performance silicon anode for use in a lithium-ion battery

Effect of Graphene on the Performance of Silicon–Carbon Composite Anode Materials for Lithium-Ion Batteries

Electrochemical Performance Enhancement of Porous Si Lithium-Ion Battery Anode by Integrating with Optimized Carbonaceous Materials