Abstract:Hard carbon (HC) materials have demonstrated great potential in sodium-ion storage; however, their application for lithium-ion storage continues to pose a challenge due to difficulties in managing carbon porosity. Most HCs exhibit completely capacitive responses when storing lithium ions, significantly hindering the nominal cell voltage of configured lithium-ion batteries. Herein, this study provides feasible solutions by introducing phenolic-formaldehyde resin-derived HCs with tunable microporous structures. The carbon porosity is well manipulated by tailoring chemically cross-linked environments via microwave-induced polymerization. A highly closed microporous HC (closed pore volume: 0.336 cm 3 g −1 ), verified by multiple gas (N 2 , O 2 , and CO 2 ) adsorptions, is successfully prepared by reducing the cross-linking degree. Combining in situ X-ray diffraction and ion-diffusion kinetic explorations, the linchpin has been clearly identified. Closed ultramicropores of <0.7 nm, which play the same role as the graphitic interlayer spacing in graphite, are termed as "active closed pores", because they can facilitate the insertion of lithium ions and mitigate substantial initial irreversible capacity by blocking the penetration of solvents. The HC with abundant active closed pores can deliver a reversible capacity of 550 mAh g −1 at 50 mA g −1 in 0.001–1.5 V, with an ultrahigh low-voltage plateau capacity of 230 mAh g −1 contributed by the lithium-ion insertion in active closed pores. The excellent rate capability (210 mAh g −1 at 2 A g −1 ) and cycling stability (90% capacity retention after 200 cycles at 0.1 A g −1 ) of this closed pore-rich HC are also confirmed, which is thus recognized as an ideal material for negative electrodes in lithium-ion batteries. This breakthrough discovery has enlightened the full potential of hard carbon materials for next-generation batteries.

Pitch modified hard carbons as negative materials for lithium-ion batteries

Effect of Carbonization Temperature on the Structure of Pitch Carbon and Its Low-temperature Lithium Storage Properties

Hard Carbon Derived from Coal Tar Pitch for Use as the Anode Material in Lithium Ion Batteries

Effect of coal tar pitch as carbon source on the electrochemical performance of silicon-carbon composites

Mechanism and application in lithium ion batteries of ferrocene catalyzed coal tar pitch to prepare fibrous carbon material with soft and hard carbon hybrid structure

Effect of Sulfur Modification on Structural and Electrochemical Performance of Pitch-Based Carbon Materials for Lithium/Sodium Ion Batteries

Highly graphitized coal tar pitch-derived porous carbon as high-performance lithium storage materials.

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

A low-cost attempt to improve electrochemical performances of pitch-based hard carbon anodes in lithium-ion batteries by oxidative stabilization

Carbon-coated Si-Cu/graphite Composite As Anode Material for Lithium-ion Batteries

Achieving high-rate capacity pitch-based carbon as anode materials for lithium-ion battery

Effect of iodine treatment on structural and electrochemical performance of coal tar pitch based carbon materials for sodium ion batteries

Freestanding and Consecutive Intermixed N-Doped Hard Carbon@Soft Carbon Fiber Architectures as Ultrastable Anodes for High-Performance Li-Ion Batteries

Modulating the Graphitic Domains of Hard Carbons Derived from Mixed Pitch and Resin to Achieve High Rate and Stable Sodium Storage

Modifications of graphite material for negative electrode of Li-ion batteries

High-rate soft carbon anode for lithium storage: from modified pitch molecular structure to ordered carbon microcrystals

Study on the Electrochemical Properties of Different Negative Electrode Materials for Li-Ion Capacitor

Lithium-ion storage mechanism in closed pore-rich hard carbon with ultrahigh extra plateau capacity

Modification mechanism of graphite anode in lithium-ion battery coated with ethylene tar pitch

Development of Hard Carbon Anode Material from Coal-Tar Pitch

The pitch-based silicon-carbon composites fabricated by electrospraying technique as the anode material of lithium ion battery