Abstract:In the process of long-term high temperature service, thermal barrier coatings (TBCs) will inevitably be sintered, leading to pores healing and porosity decline, which will affect the microstructure and the stability of mechanical properties of TBCs. To understand the relationship between the microstructural changes of sintered TBCs and the mechanical properties, in this work, the cross-sectional microstructure of TBCs at different sintering times were investigated by scanning electron microscopy (SEM). After calculating the porosity and pore size distribution, two-dimensional (2D) numerical models were developed for five different porosities (16 %–12 %) by an improved reconstruction method with layer-by-layer labeling. Based on the results of finite element (FE) analysis after thermal cycling, it was found that the coating's irregular pore structures lead to stress concentration, which affects the mechanical properties of the coating to a great extent. For the whole TC layer, the level of stresses increases and the absolute value of maximum stress augments significantly by 46 % associated with the doubled increase of stress concentration areas with the densification of coating. For the local areas of TC layer, the changes in pore morphology led to a more complex variation in local stress fields. At the TC/BC interface, the Mises stress level tends to increase with decreasing porosity during sintering. At the TC surface, coatings with lower porosities cause higher stresses near this region. The insights gained from the numerical results contribute to a better understanding of the failure behavior of real TBCs systems and help to further remedy the deficiencies and difficulties of the experimental work.

Stage-sensitive microstructural evolution of nanostructured TBCs during thermal exposure

A Comprehensive Mechanism for the Sintering of Plasma-Sprayed Nanostructured Thermal Barrier Coatings

A comprehensive sintering mechanism for TBCs-Part I: An overall evolution with two-stage kinetics

Self-Enhancing Thermal Insulation Performance of Bimodal-Structured Thermal Barrier Coating

Microstructure characteristics and deformation-induced crystalline-to-amorphous phase transformation in thermal barrier coatings during thermal cycling

Scale-progressive Healing Mechanism Dominating the Ultrafast Initial Sintering Kinetics of Plasma-Sprayed Thermal Barrier Coatings

Effect of sintering on stress distribution of thermal barrier coatings for high temperature blade

Strain/sintering Co-Induced Multiscale Structural Changes in Plasma-Sprayed Thermal Barrier Coatings

Durable TBCs with Self-Enhanced Thermal Insulation Based on Co-Design on Macro- and Microstructure

Study on the Microstructure Evolution of Nano and Micron-size Thermal Barrier Coatings during Thermal Cycling

Sintering Induced the Failure Behavior of Dense Vertically Crack and Lamellar Structured TBCs with Equivalent Thermal Insulation Performance

Corrigendum to “Understanding of degradation-resistant behavior of nanostructured thermal barrier coatings with bimodal structure” [J. Mater. Sci. Technol. 35 (2019) 231–238]

Effect of Heat Treatment at 900 °C on Microstructural and Mechanical Properties of Thermal Barrier Coatings

Sintering Characteristics of Plasma-Sprayed TBCs: Experimental Analysis and an Overall Modelling

Substrate-constrained Effect on the Stiffening Behavior of Lamellar Thermal Barrier Coatings

Microstructure and Thermal Cycling Behavior of Thermal Barrier Coating on Near-Α Titanium Alloy

Achieving Self-Enhanced Thermal Barrier Performance Through a Novel Hybrid-Layered Coating Design

Strain tolerance evolution of EB-PVD TBCs after thermal exposure or CMAS attack

A matching design co-enhancing thermal barrier and thermal cyclic performances of sintering-resistant coatings

Critical Scale Grain Size for Optimal Lifetime of TBCs

Corrigendum to “A comprehensive sintering mechanism for TBCs‐Part II: Multiscale multipoint interconnection‐enhanced initial kinetics”