Abstract:The structure of a TBC is locally tailored oriented by regional performance requirements to balance the tradeoff between high thermal insulation and long lifespan. The design‐matched TBCs exhibited double the lifespan of the conventional sample with comparable thermal insulation. Mechanism responsible for the long life span was revealed based on healing of the intrinsic two‐dimensional pores and formation of new large pores. Thermal barrier coatings (TBCs) require both a porous structure to effectively prevent heat flux and a considerably dense structure to resist cracking for long‐term protection. These opposite requirements are difficult to achieve in conventional TBCs, which often exhibit uniform structures across their thickness. In fact, the main requirements of a coating vary with thickness owing to differential service conditions. In this study, the structure of a TBC is locally tailored to meet regional performance requirements. First, the load‐bearing conditions across the thickness are investigated in a simulation study. Resulting from multiple causes, the bottom region must bear a larger stress than the top region, which is directly exposed to heat flux. Therefore, the structure should be crack‐resistant in its bottom region and thermally insulating in its top region. Second, region‐function‐matching TBCs were prepared, and their performances were evaluated through isothermal cycling and thermal exposure tests. Results show that the TBCs with matching design exhibited double the lifespan of the conventional samples, whereas the thermal insulation was comparable. Finally, the structural evolutions were examined in different regions to analyze the failure behaviors of the TBCs. Healing of the intrinsic two‐dimensional pores and formation of the new large pores mainly account for the changes in thermal and mechanical properties of the TBCs. Overall, this region‐function‐matching design is expected to balance the tradeoff between high thermal insulation and long lifespan.

Corrigendum to “Understanding of degradation-resistant behavior of nanostructured thermal barrier coatings with bimodal structure” [J. Mater. Sci. Technol. 35 (2019) 231–238]

Stage-sensitive microstructural evolution of nanostructured TBCs during thermal exposure

Tailoring degradation-resistant thermal barrier coatings based on the orientation of spontaneously formed pores: From retardation to self-improvement

A Comprehensive Mechanism for the Sintering of Plasma-Sprayed Nanostructured Thermal Barrier Coatings

The Effect of Two Raw YSZ Materials with Different Morphology on TBCs Via Atmospheric Plasma Spraying: Microstructures and High-Temperature Performance

A comprehensive sintering mechanism for TBCs-Part I: An overall evolution with two-stage kinetics

Self-Enhancing Thermal Insulation Performance of Bimodal-Structured Thermal Barrier Coating

Microstructural Design and Thermal Cycling Performance of a Novel Layer-Gradient Nanostructured Sc2O3–Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coating

Corrigendum to “A comprehensive sintering mechanism for TBCs‐Part II: Multiscale multipoint interconnection‐enhanced initial kinetics”

Study on the Microstructure Evolution of Nano and Micron-size Thermal Barrier Coatings during Thermal Cycling

Thermal Cycling Behavior of Nanostructured and Conventional Yttria-Stabilized Zirconia Thermal Barrier Coatings Via Air Plasma Spray

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Achieving Self-Enhanced Thermal Barrier Performance Through a Novel Hybrid-Layered Coating Design

A matching design co-enhancing thermal barrier and thermal cyclic performances of sintering-resistant coatings

Constrained Healing and Morphology Change Mechanism of 2D Cracks in Plasma Sprayed Thermal Barrier Coatings

Improve durability of plasma-splayed thermal barrier coatings by decreasing sintering-induced stiffening in ceramic coatings

Microstructure and Thermal Cycling Behavior of Thermal Barrier Coating on Near-Α Titanium Alloy

Failure Analysis of Fine-Lamellar Structured Ysz Based Thermal Barrier Coatings with Submicro/Nano-Grains

Damage Grading Evaluation of Thermal Barrier Coatings under CMAS Corrosion

Region‐function‐matching design for YSZ‐based thermal barrier coatings enables long thermal cyclic lifespan

Effect of sintering on stress distribution of thermal barrier coatings for high temperature blade