Abstract:Fast charging is critical for the efficient storage of energy in devices like electric vehicles and portable electronics. The rate performance of electrodes is limited by the electron transfer rate, the ohmic resistance of the electrode, the size and shape of the primary electrode particles, and the charge carrier diffusion process within the electrodes. However, separating the intrinsic contributions of mass transport and charge transfer from non-equilibrium data obtained under large interfacial polarization is very complex, which limits our understanding of high rate electrodes during charging and discharging. While it is possible to extract the diffusive and capacitive components of an electrode’s capacity from cyclic voltammetry (CV) data using the Dunn method, the Dunn model assumes a constant diffusional overpotential. In reality the ohmic resistance scales with the current, so that the ohmic potential drop across the electrode cannot be neglected a priori for fast charging electrodes in which high current densities are a requirement. We recently developed a new model based on the Butler-Volmer equation for the kinetics of the electron exchange process, and incorporated the charge carrier diffusion process and the internal ohmic losses, as well as the effect of the shape and dimensions of the primary electrode particles on the effective diffusion rate [1]. The model can provide the relation between current peak voltages and peak currents from a series of sweep rate CV measurements. The ohmic resistance, equilibrium voltage, exchange current (related to the electrochemical reaction rate) and limiting current (related to the charge carrier diffusion coefficient and Nernst diffusion layer thickness) can be extracted as independent variables from the fitted experimental data. By simulating a range of different high rate Li electrode materials (both cathodes and anodes), we identified influence of the reaction rate on the overpotential as a common significant factor, which explains the nonlinear relation between the potential and the current at peak position in different CV measurements. Our analysis suggests that a higher electrochemical reaction rate seems to be more important for the realization of faster charging batteries than a larger carrier diffusion coefficient. Finally, our extended model also enables us to predict the overpotential at any applied potential, which is not possible with other current models known till date. This insight helps us to gain more detailed understanding of the relationship between the intrinsic properties of the electrode materials and their rate performance in different reaction stages. This may facilitate further modification of electrode material towards enhanced high rate performance in next-generation batteries. [1] R. Xia et al., Energy Storage Mater. 53 (2022) 381-390.

Potentiostatic Current Transient For Multiple Nucleation: A Limited-Diffusion Process Description

RETRACTED: Copper Electrodeposition in Through-Silicon Via under Galvanostatic Condition

Simulation of TSV Copper Electrodeposition Process with Additives

Effect of Intrachannel Ion Transport on Transient Characteristics of Nanochannels

Current Transition of Nucleation and Growth under Diffusion-Controlled Electrocrystallization: A Brief Review

Heterogeneous nucleation - current transients under chemical reaction control

Analysis of the Kinetics of Electrochemical Migration on Printed Circuit Boards Using Nernst-Planck Transport Equation

Understanding the Dynamic Potential Distribution at the Electrode Interface by Stochastic Collision Electrochemistry

Decoupling Reaction, Diffusion and Ohmic Processes in Fast-Charging Electrodes: A New Model for CV Data Analysis

New in situ description of electrodepositing multiple nucleation processes under galvanostatic stimuli

Cyclic Reciprocal Derivative Chronopotentiometric Behavior of Electrode Process in the Presence of Adsorptive Reactants: A Theoretical Study of the Electrolysis Sequence of Adsorptive and Diffusing Electroactive Reactants

The Establishment of Current Transient of Nucleation and Growth under Diffusion-Controlled Electrocrystallisation: A Microreview

Simulation of Leveling in Electrodeposition

Can a cylindrical geometry describe diffusion in a nanometric porous media?

Electrochemical Modeling of GITT Measurements for Improved Solid-State Diffusion Coefficient Evaluation

Electrodiffusion kinetics of ionic transport in a simple membrane channel

Can a cylindrical geometry describe reaction-driven diffusion in nanometric porous media?

A three-ions model of electrodiffusion kinetics in a nanochannel

Ion Transport in an Electrochemical Cell: A Theoretical Framework to Couple Dynamics of Double Layers and Redox Reactions for Multicomponent Electrolyte Solutions

Modeling of Coupling Between Free Volume Evolution and Diffusion in Silicon Electrodes of Lithium-Ion Batteries

Simulation and Experimental Research of Melt Convection on Dendrite Morphology Evolution