Abstract:The corrosion resistance and stress corrosion cracking (SCC) susceptibility of Type 347H stainless steel (SS) in supercritical water (SCW) were investigated. The general corrosion behavior was investigated by exposure test and the specimens after testing were characterized utilizing scanning electron microscopy (SEM), Auger and x-ray diffraction analysis, optical microscopy, and energy dispersive spectroscopy (EDS). The results show that with the increase of testing temperature, the corrosion rate of the materials is greatly enhanced. The corrosion process is analyzed and the formation of oxide islands on the surface of the corroded sample is attributed to the higher diffusion rate of Cr along the grain boundary. The effects of temperature and dissolved oxygen on SCC susceptibility were investigated by slow strain rate tensile test. The fractographs were characterized by SEM and the cross-section morphologies were characterized with back-scattered electron imaging, SEM, and EDS. The results indicate that, as temperature is increased, the tensile strength and strain of materials is greatly reduced, while the oxygen content in SCW has a limited effect on the mechanical properties. Intergranular cracking and ductile fracture are the main fracture modes for Type 347H SS tested in SCW, independent of temperature and oxygen content. The implications of the results to the mechanisms of SCC are discussed.

Stress Corrosion Crack Growth Behavior of Type 310S Stainless Steel in Supercritical Water

Stress Corrosion Cracking Behavior of 310S Stainless Steel in Supercritical Water at Different Temperature

Corrosion and Stress Corrosion Cracking Susceptibility of Type 347H Stainless Steel in Supercritical Water

A Study on the Corrosion and Stress Corrosion Cracking Susceptibility of 310-ODS Steel in Supercritical Water

Stress Corrosion Cracking Behavior of 310S in Supercritical Water with Different Oxygen Concentrations

A Research on the Corrosion and Stress Corrosion Cracking Susceptibility of 316L Stainless Steel Exposed to Supercritical Water

Effects of Chloride and Oxygen on Stress Corrosion Cracking of Cold Worked 316/316L Austenitic Stainless Steel in High Temperature Water

Correlating oxidation resistance to stress corrosion cracking of 309L and 308L stainless steel claddings in simulated PWR primary water

Stress Corrosion of Austenitic Stainless Steel 316L in High Temperature Water

Evaluation of Stress Corrosion Cracking Susceptibility of Forged 316 Stainless Steel in Simulated Primary Water

Characterizing the Effect of Creep on Stress Corrosion Cracking of Cold Worked Alloy 690 in Supercritical Water Environment

Investigations on the SCC initiation behavior of cold worked 316L in high temperature oxygenated water at constant loads

Characterizing the Effects of In-Situ Sensitization on Stress Corrosion Cracking of Austenitic Steels in Supercritical Water

Effect of Temperature and Dissolved Oxygen on Stress Corrosion Cracking Behavior of P92 Ferritic-Martensitic Steel in Supercritical Water Environment

Investigations on the SCC initiation behavior of cold worked 316 L in high temperature oxygenated water at constant loads

Comparison of the Stress Corrosion Cracking Growth Behavior of Cold Worked Alloy 690 in Subcritical and Supercritical Water

Environmentally Assisted Cracking of Forged 316LN Stainless Steel and Its Weld in High Temperature Water

Study on Corrosion Fatigue Behavior of 304L Austenite Stainless Steel in 325 °C High-Temperature Water Environment

Stress Corrosion Cracking of Uni-Directionally Cold Worked 316ng Stainless Steel in Simulated Pwr Primary Water with Various Dissolved Hydrogen Concentrations

Stress Corrosion Cracking Behavior of Cold-Drawn 316 Austenitic Stainless Steels in Simulated Pwr Environment

Effect of Cold Work on the Stress Corrosion Cracking Behavior of Alloy 690 in Supercritical Water Environment