Abstract:Field material testing provides firsthand information on pavement conditions which are most helpful in evaluating performance and identifying preventive maintenance or overlay strategies. High variability of field asphalt concrete due to construction raises the demand for accuracy of the test. Accordingly, the objective of this study is to propose a reliable and repeatable methodology to evaluate the fracture properties of field-aged asphalt concrete using the overlay test (OT). The OT is selected because of its efficiency and feasibility for asphalt field cores with diverse dimensions. The fracture properties refer to the Paris' law parameters based on the pseudo J-integral (A and n) because of the sound physical significance of the pseudo J-integral with respect to characterizing the cracking process.In order to determine A and n, a two-step OT protocol is designed to characterize the undamaged and damaged behaviors of asphalt field cores. To ensure the accuracy of determined undamaged and fracture properties, a new analysis method is then developed for data processing, which combines the finite element simulations and mechanical analysis of viscoelastic force equilibrium and evolution of pseudo displacement work in the OT specimen. Finally, theoretical equations are derived to calculate A and n directly from the OT test data. The accuracy of the determined fracture properties is verified.The proposed methodology is applied to a total of 27 asphalt field cores obtained from a field project in Texas, including the control Hot Mix Asphalt (HMA) and two types of warm mix asphalt (WMA). The results demonstrate a high linear correlation between n and log A for all the tested field cores. Investigations of the effect of field aging on the fracture properties confirm that n is a good indicator to quantify the cracking resistance of asphalt concrete. It is also indicated that summer climatic condition clearly accelerates the rate of aging. The impact of the WMA technologies on fracture properties of asphalt concrete is visualized by comparing the n-values. It shows that the Evotherm WMA technology slightly improves the cracking resistance, while the foaming WMA technology provides the comparable fracture properties with the HMA. After 15 months aging in the field, the cracking resistance does not exhibit significant difference between HMA and WMAs, which is confirmed by the observations of field distresses. (C) 2015 Elsevier Ltd. All rights reserved.

Investigation of sand mixture interlayer reducing the thermal constraint strain in asphalt concrete overlay

Analysis of the Fatigue Crack Propagation Process of the Stress-Absorption Layer of Composite Pavement Based on Reliability

Using Overlay Test to Evaluate Fracture Properties of Field-Aged Asphalt Concrete

Structure Optimization and Numerical Analysis of Cement Concrete Overlay of Some Secondary Road Overlay

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Thermal contraction coordination behavior between unbound aggregate layer and asphalt mixture overlay based on the finite difference and discrete element coupling method

Interlocking Evaluation of Mesoscopic Skeleton with the Compaction Degree of Hot-Mix Asphalt

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Research on Nonlinear Contact Condition Characteristic of Bitumen Pavement

Experimental Study on the Anti-Cracking Performance for High Viscoelastic Asphalt Sand with SCB

Thickness ranges calculation method of double asphalt overlay on concrete pavement

Laboratory evaluation of the effect of cement concrete overlays on the existing asphalt concrete pavement with different degrees of bonding

Chemical component and low-temperature characteristics of modified asphalt composite with styrene–butadiene rubber and liquid nitrile rubber

Investigation of Dynamic Viscoelastic Characteristics of Permeable Asphalt

Asphalt pavement heat insulation bonding layer materials: Composition optimization and engineering application

Asphalt Layer Cracking Behavior and Thickness Control of Continuously Reinforced Concrete and Asphalt Concrete Composite Pavement

Thermal Stress of Asphalt Pavement Based on Dynamic Characteristics of Asphalt Mixtures

Pavement Structure Optimization Analysis of Basalt Fiber High Modulus Asphalt Mixture

Encapsulation for Sensing Element and Its Application in Asphalt Road Monitoring

Study on preparation and thermal performance improvements of composite phase change material for asphalt steel bridge deck