Abstract:In order to provide a basis for the structural analysis, design and maintenance of permeable asphalt pavements, and to promote their engineering promotion and application, this study investigated the dynamic viscoelastic properties of permeable asphalt mixtures (PAC-13) under complex stress states. A Simple Performance Tester (SPT) system was used to measure the dynamic modulus of the mix under complex stress states. The displacement factor and principal dynamic modulus curves were formed by fitting Sigmoidal functions and using 1stOpt (first optimization) software, the phase angle principal curves were further determined, and the dynamic modulus was predicted for the ambient phase (15 °C–25 °C) using the Hirsch model. The results showed that the dynamic modulus of the mixtures decreases with an increasing temperature, and the maximum decrease in the dynamic modulus is 93% when the confining pressure is 100 kPa and the loading frequency is 10 Hz. The dynamic modulus increases with an increasing confining pressure and loading frequency, the maximum increase with an increasing confining pressure is 26.1% when the temperature is 25 °C and the loading frequency is 10 Hz, and the maximum increase with an increasing loading frequency is 411% when the temperature is 25 °C and the confining pressure is 100 Hz. The dynamic modulus has a strong frequency dependence at low temperatures, while it is stress-dependent at high temperatures. Meanwhile, based on the Hirsch model, a new modified prediction model was developed, which can well predict the dynamic modulus of permeable asphalt mixtures at room temperature.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to systematically evaluate the dynamic visco - elastic properties of porous asphalt mixture (PAC - 13) under complex stress states, especially the change of dynamic modulus when the temperature, confining pressure and loading frequency change. Specifically, the research aims to:
1. **Establish the master curves of phase angle and dynamic modulus**: Through comprehensive dynamic modulus tests, develop the master curves of phase angle and dynamic modulus applicable to porous asphalt mixtures.
2. **Predict the dynamic modulus**: Based on the Hirsch model, develop a new modified prediction model to predict the dynamic modulus of porous asphalt mixtures more accurately under room - temperature conditions.
3. **Verify the applicability of the Hirsch model**: If the Hirsch model is not applicable to porous asphalt mixtures, develop a new modified prediction model based on this model.
4. **Provide the basis for design and construction**: Provide a scientific basis for the design and construction of porous asphalt mixtures and promote their application in actual projects.
### Research Background
At present, most urban roads use dense - graded asphalt mixtures, which have a negative impact on the ecological environment, such as low permeability and low noise - reduction ability, resulting in increasingly serious urban heat - island effects and noise pollution problems. In order to achieve sustainable development in urban construction, the construction of permeable asphalt pavements has become a new trend in "sponge cities". Permeable asphalt mixtures have the advantages of high anti - skid performance, low noise and good drainage performance, but while increasing the porosity, they also weaken their mechanical properties. Therefore, it is necessary to ensure that permeable asphalt mixtures have excellent permeability and mechanical properties.
### Importance of Dynamic Modulus
Dynamic modulus is the main parameter for analyzing the mechanical characteristics and structural design of asphalt pavements. Currently, according to the "Mechanistic - Empirical Pavement Design Guide", dynamic modulus is mainly measured by uniaxial compression dynamic modulus tests. However, in actual working conditions, asphalt pavement structures are usually in a multiaxial stress state, so triaxial dynamic modulus tests can evaluate the mechanical properties of asphalt pavements more objectively.
### Research Contents
1. **Material and gradation design**: Select SBS - modified asphalt from East China Sea Petroleum and prepare specimens by the gyratory compaction method, with a target porosity of 20%.
2. **Dynamic modulus test**: Use a simple performance tester (SPT) produced by IPC in Australia to conduct dynamic modulus tests at different temperatures (4°C, 15°C, 25°C, 40°C, 55°C), confining pressures (0 kPa, 100 kPa, 200 kPa) and loading frequencies (0.1 Hz, 0.5 Hz, 1 Hz, 5 Hz, 10 Hz, 20 Hz).
3. **Data analysis**:
- Influence of temperature on phase angle and dynamic modulus: As the temperature rises, the dynamic modulus decreases, and at higher confining pressures, the temperature sensitivity decreases.
- Influence of confining pressure on phase angle and dynamic modulus: At low temperatures, the confining pressure has a small influence on the dynamic modulus; while at high temperatures, the confining pressure significantly affects the dynamic modulus.
- Influence of loading frequency on phase angle and dynamic modulus: As the loading frequency increases, the dynamic modulus increases, and in the low - temperature range, the dynamic modulus changes more obviously with the frequency.
### Main Innovation Points
1. Based on the Hirsch model, a new modified prediction model has been developed to predict the dynamic modulus of porous asphalt mixtures.
2. It has been found that porous asphalt mixtures show significant stress - dependence at high temperatures, and the presence of confining pressure reduces the temperature sensitivity at high temperatures.
3. Considering the mechanical properties of porous asphalt mixtures under complex stress conditions can better reflect the mechanical response of pavements under actual stress conditions.
Through these studies, the paper provides valuable data support for the design and construction of porous asphalt mixtures and promotes their practical application in various application scenarios.