Abstract:The mechanical characteristics of asphalt mixture are closely related with its stress state, temperature, and loading rate, therefore, the loading condition of the asphalt mixture's dynamic modulus test should be consistent with the actual temperature, loading frequency, and stress state that are applied to the mixture in actual pavement, thus can the test produce an objective result that can accurately reflect the actual stress-strain relationship for the asphalt mixture. However, due to limitations in the loading capacity of current dynamic modulus test equipment, the present modulus tester cannot yet set such a loading condition whose stress state is consistent with that of asphalt mixture in actual pavement. As a result, the modulus testing results of the current test may not accurately reflect the actual stress-strain characteristics of an asphalt mixture under real traffic loads. Therefore, this paper aims to figure out the impact of stress state on asphalt mixture's dynamic modulus, and firstly conducts a numerical analysis to ascertain asphalt pavement's triaxial stress state at different depth, then, utilizing the nonlinear elasticity theory of Soil Plasticity, proposes a theoretical model that can reflect triaxial stress state's effect on asphalt mixture's dynamic modulus, and then, arranges a series of triaxial dynamic modulus tests for asphalt mixture in different stress state to verify the model's effectiveness, and meantime analyzes stress state's influencing rule to asphalt mixture's dynamic modulus. Their results indicate, the asphalt mixture of the actual pavement is in an obvious triaxial stress state, and that the higher the triaxial stress state, the larger the dynamic modulus, particularly for the mixture near the surface, whose high stress state will lead to their dynamic modulus to be significantly larger than that of the underlying course, while the model proposed in this paper can to a large extent reflect this impact.

Thermal Stress of Asphalt Pavement Based on Dynamic Characteristics of Asphalt Mixtures

Thermal responses of layered pavement system with unsteady heat conduction

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

New Evaluation of Temperature Stress in Asphalt Concrete Pavements under Low Temperature

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Stress-dependent mechanical behavior of asphalt mixtures

Characterization of the thermo-mechanical behaviour of the asphalt mixture by microstructural analysis and FE simulation

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Impact of triaxial stress state at various pavement depths on the dynamic modulus of asphalt mixture

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Influence of Temperature on the Mechanical Response of Asphalt Mixtures Using Microstructural Analysis and Finite-Element Simulations

Thermal-Mechanical Coupling Analysis of Permeable Asphalt Pavements

Investigation of Dynamic Viscoelastic Characteristics of Permeable Asphalt

Consideration of Heat Transfer Characteristics in Thermal Stress Calculations of Asphalt Mixtures in the TSRST

Mechanical Analysis of the Stress State and Damage Risk of Asphalt Pavement Based on a Three-Dimensional Space Calculation Program

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Development of a Microstructure-Based Numerical Approach for Analyzing Heat Transfer Within the Asphalt Mixture

Cracking Analysis of Asphalt Pavement Based on Dynamic Modulus

Numerical Simulation of Mechanical Response Analysis of Asphalt Pavement under Dynamic Loads with Non-Uniform Tire-Pavement Contact Stresses

Experimental Analysis of Dynamic Modulus and Phase Angle of High Modulus Asphalt Mixture