Abstract:Abstract Thermal barrier coatings are widely used in gas turbines to protect the gas turbine metal components against very high combustion product temperature. To improve energy efficiency, higher combustion temperatures are needed. A limiting factor at present is the stability under extreme and prolonged heating of thermal barrier coatings. The coatings are typically made by the air plasma sprayed process in which fine particles of yttria-stabilized zirconia (YSZ) are melted or partially melted and ejected from plasma jet at high speed onto the bond coated substrate metal. With increasing combustion temperature and pressure in the modern gas turbine engines radiative heat transfer is becoming an important portion of the overall heat transfer in the thermal barrier coating. This study has demonstrated that the commonly used Kubelka-Munk method in the radiative property reduction from the measured transmittance and reflectance spectra of YSZ coatings will incur inaccurate result when the coating optical thickness is not sufficiently large. An alternative method — the discrete ordinates method with the asymmetric spherical ring angular quadrature — is used instead. The absorption and scattering coefficients of air plasma sprayed YSZ films are determined over the wavelength range from 1 to 2.6 μm at room temperature. Over this near infrared wavelength range, the scattering coefficient decreases with the increasing wavelength and the absorption coefficient is very small overall. The pore size distributions before and after the 50-hr temperature gradient, thermal cycling are compared. The sintering effect as well as the crack growth will impact the coating radiative properties. These results point to a clear need for better understanding of the radiative heat transfer process, which includes the microstructure-property relationship, progressive changes of the radiative properties with the operation condition and time.

Microstructural Effect on Radiative Scattering Coefficient and Asymmetry Factor of Anisotropic Thermal Barrier Coatings

Effective medium theory for thermal scattering off rotating structures.

Effect of Pore Evolution on Thermal Diffusivity and Radiation Characteristics of Thermal Barrier Coatings after High-Temperature Exposures

Near Infrared Radiative Properties of Thermal Barrier Coatings

Structural Optimization for the Thermal Conductivity and Thermal Cycling Behavior in Thermal Barrier Coatings and Analysis of Thermomechanical Properties by Computational Investigation

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Effect of interface on the thermal conductivity of thermal barrier coatings: A numerical simulation study

Effect of porous microstructure on the elastic modulus of plasma-sprayed thermal barrier coatings: Experiment and numerical analysis

Influence of crack and pore structure characteristics on the thermal protective performance of thermal barrier coatings based on LBM

Effect of sintering on stress distribution of thermal barrier coatings for high temperature blade

Thermal Conductivity of Multi-Sized Porous Thermal Barrier Coatings at Micro and Nano Scales after Long-Term Service at High Temperatures

Microcrack Morphology in the Thermal Insulation Performance of 8YSZ Thermal Barrier Coatings: A Mesoscale Numerical Study

Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings

Microstructure Dependence of Effective Thermal Conductivity of EB-PVD TBCs

Formation Mechanism of an Ultra-Low Thermal Conductivity Thermal Barrier Coating Deposited Using Biomimetic Hierarchical Porous Microspheres

Thermal Conductivity Prediction in Air Plasma Sprayed Thermal Barrier Coatings Containing Multifarious Defects

Enhanced Thermal Isolation in Porous Thermal Barrier Coatings by the Formation of Pore Guided Thermal-Shock Cracks

A Simulation Study on the Crack Propagation Behavior of Nanostructured Thermal Barrier Coatings with Tailored Microstructure

Achieving high anti-sintering performance of plasma-sprayed YSZ thermal barrier coatings through pore structure design

A transmission electron microscopy study of the microstructure and interface of zirconia-based thermal barrier coatings

Microstructure Observation and Nanoindentation Size Effect Characterization for Micron-/Nano-Grain TBCs