Abstract:In the process of long-term high temperature service, thermal barrier coatings (TBCs) will inevitably be sintered, leading to pores healing and porosity decline, which will affect the microstructure and the stability of mechanical properties of TBCs. To understand the relationship between the microstructural changes of sintered TBCs and the mechanical properties, in this work, the cross-sectional microstructure of TBCs at different sintering times were investigated by scanning electron microscopy (SEM). After calculating the porosity and pore size distribution, two-dimensional (2D) numerical models were developed for five different porosities (16 %–12 %) by an improved reconstruction method with layer-by-layer labeling. Based on the results of finite element (FE) analysis after thermal cycling, it was found that the coating's irregular pore structures lead to stress concentration, which affects the mechanical properties of the coating to a great extent. For the whole TC layer, the level of stresses increases and the absolute value of maximum stress augments significantly by 46 % associated with the doubled increase of stress concentration areas with the densification of coating. For the local areas of TC layer, the changes in pore morphology led to a more complex variation in local stress fields. At the TC/BC interface, the Mises stress level tends to increase with decreasing porosity during sintering. At the TC surface, coatings with lower porosities cause higher stresses near this region. The insights gained from the numerical results contribute to a better understanding of the failure behavior of real TBCs systems and help to further remedy the deficiencies and difficulties of the experimental work.

Effect of porous microstructure on the elastic modulus of plasma-sprayed thermal barrier coatings: Experiment and numerical analysis

Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings

Physical and mechanical properties of plasma-sprayed thermal barrier coatings at room and high temperatures

Structural Optimization for the Thermal Conductivity and Thermal Cycling Behavior in Thermal Barrier Coatings and Analysis of Thermomechanical Properties by Computational Investigation

Thermal Conductivity of Multi-Sized Porous Thermal Barrier Coatings at Micro and Nano Scales after Long-Term Service at High Temperatures

Measurement of the Elastic Modulus and Residual Stress of Thermal Barrier Coatings Using a Digital Image Correlation Technique

Investigating the Cmas Corrosion Resistance and Thermal Cycling Failure Behavior of Porous Thermal Barrier Coatings with Different Morphologies Prepared by Plasma Spraying

Nanomechanical properties of plasma-sprayed nanostructured and conventional 8YSZ thermal barrier coatings

Effect of sintering on stress distribution of thermal barrier coatings for high temperature blade

Thermal Conductivity Prediction in Air Plasma Sprayed Thermal Barrier Coatings Containing Multifarious Defects

Effect of Pore Evolution on Thermal Diffusivity and Radiation Characteristics of Thermal Barrier Coatings after High-Temperature Exposures

Achieving high anti-sintering performance of plasma-sprayed YSZ thermal barrier coatings through pore structure design

Effect of Heat Treatment at 900 °C on Microstructural and Mechanical Properties of Thermal Barrier Coatings

Enhanced thermal radiation blocking of plasma spraying thermal barrier coatings with a bimodal splat thickness distribution

Effect of sintering temperature on microstructure and properties of thermal barrier coating

Effects of TGO growth on the interface stress distribution based on 3D pores in TBC ceramics layer

Study on Construction Mechanism of Ceramic–Metal Thermal Barrier Coating System by Plasma Spraying

Thermal Aging Effect on In-Plane and Cross-Plane Thermal Diffusivities of Plasma-Sprayed Thermal Barrier Coating

Influence of Air Plasma Spay Distance on the Properties of TBC

Internal Diameter Atmospheric-Plasma-Sprayed High-Performance YSZ-Based Thermal Barrier Coatings

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch