Abstract:In the current work, the yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) have been fabricated by atmospheric plasma spraying. The failure mechanism of the TBCs during burner rig test (BRT) has been investigated via finite element modeling (FEM) and in-situ acoustic emission (AE) technique systematically. During the BRT, the oxygen-propane flame was heated onto the surface of the coating samples with the dwell time 3 min, then the surface and the backside of the coating samples were cooled by the compressed air simultaneously for 3 min. This can be viewed as one thermal cycle. Then repeat the same heating and cooling process. The history and distribution of the temperature along the through-thickness direction of the coating samples has been obtained via FEM, and the residual stress at different stages has been also calculated. The FEM results have indicated that large tensile stress and compressive stress existed at the heating stage and cooling stage of each thermal cycle, respectively. The crack propagation tends to occur at the initial period of heating stage in the BRT process. The in-situ acquisition of the AE signals during the BRT has also been adopted. The crack propagation patterns have been obtained based on the analysis of AE signals. The filtering technique has been used to exclude the disturbance of the noise in the process of BRT in order to capture the actual and effective AE signals which represent the crack propagation and the deformation of the coating systems. Based on the characteristic waveform of effective AE signals, the Fast Fourier Transformation (FFT) and wavelet transformation has been adopted to analyze the key distribution range of the amplitude and frequency. The investigation results indicate that the acquired AE signals during BRT mainly include signals which came from the plastic deformation of the substrate and creep of each layers, propagation of the vertical crack and propagation of the interfacial cracks (horizontal crack). The detailed failure mechanisms of the TBCs during BRT have been clarified in the current work.

A Simulation Study on the Crack Propagation Behavior of Nanostructured Thermal Barrier Coatings with Tailored Microstructure

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Discrete element modeling of effect of interfacial roughness and pre-crack on crack propagation in thermal barrier coatings

Microcrack Morphology in the Thermal Insulation Performance of 8YSZ Thermal Barrier Coatings: A Mesoscale Numerical Study

A Diffusion-Coupled Cohesive Element Model for Cracking Analysis of Thermal Barrier Coatings

Atmospheric plasma sprayed thick thermal barrier coatings: Microstructure, thermal shock behaviors and failure mechanism

Enhanced Thermal Isolation in Porous Thermal Barrier Coatings by the Formation of Pore Guided Thermal-Shock Cracks

Computational analysis of thin coating layer failure using a cohesive model and gradient plasticity

Modeling 3D TGO dynamic growth and stresses and the resulting modes of buckling failure in thermal barrier coatings

Towards Full Ab Initio Simulations of Mechanical Response of Ti-N Binary System under Extremely Operational Conditions Via Neural Network Potential

Fracture Behavior of TBCs with Cooling Hole Structure under Cyclic Thermal Loadings

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Chemo-thermo-mechanical modeling of EB-PVD TBC failure subjected to isothermal and cyclic thermal exposures

Microstructure-based crack formation in tungsten exposed to cyclic transient heating

Cross-scale modeling and elasto-plastic mechanical properties of TBC with 3D hill-like interface

Study of stress-driven cracking behavior and competitive crack growth in functionally graded thermal barrier coatings

SEM-Guided Finite Element Simulation of Thermal Stresses in Multilayered Suspension Plasma-Sprayed TBCs

Microstructure characteristics and deformation-induced crystalline-to-amorphous phase transformation in thermal barrier coatings during thermal cycling

Prediction of critical rupture of plasma-sprayed yttria stabilized zirconia thermal barrier coatings under burner rig test via finite element simulation and in-situ acoustic emission technique

Influence of non-uniform feature of thermally grown oxide thickness on the local stress state and cracking behavior in TBC