Abstract:The durability of proton exchange membrane fuel cell stacks is a key limiting factor in transportation application due to severe conditions, where startup-shutdown and local fuel starvation most severely threaten the structure stability. In this paper, potentiostatic test at the average of 1.4 V is conducted to accelerate the carbon corrosion and structure damage in the cathode in a seven-cell commercial stack. A complete diagnosis framework based on micro-current excitation is established to systematically and in-situ evaluate the state-of-health of the cathode and the membrane, the mass transfer state, and the cell inconsistency in stack-level. Afterwards, the structure damage of cathode catalyst layer is characterized with scanning electron microscopy and energy disperse spectroscopy to provide direct evidences. In the early stage, the electrochemical surface area attenuates severely attributed to detachment and agglomeration of Pt particles, and the catalyst layer framework becomes more porous and hydrophilic, thus raising the double-layer capacitance. The weak catalyst layer structure tends to collapse starting from the lower layer close to the membrane, thereby leaving the dense lower layer and the porous upper layer in all cells. The damage mode is accurately manifested by the stepwise increase in the hydrogen transfer coefficient in the cathode that is identified in electrochemical testing. Meanwhile, the per-formance decay during operation exhibits typical characteristics of water flooding deterioration, as indicated by the three stages of steady voltage decay, drastic and periodic voltage fluctuation, and cell reversal. Therefore, the increase in water sensitivity and its dominant role in startup-shutdown-induced degradation are confirmed, which are also supported by the carbon-corrosion-induced ionomer agglomeration surrounding the enlarged pores in the upper layer. The enlarged pores are prone to be flooded, and the collapsed partial structure inherently limits the mass transfer. The aging process, evolution mechanisms of internal damage, and dominant factors during startup-shutdown are therefore identified and clearly revealed in stack-level.

Comprehensive analysis of galvanostatic charge method for fuel cell degradation diagnosis

Use of galvanostatic charge method as a membrane electrode assembly diagnostic tool in a fuel cell stack

Diagnosis Methods Dedicated to the Localisation of Failed Cells Within PEMFC Stacks

Dynamic Inconsistent Analysis and Diagnosis of Abnormal Cells Within a High-power Fuel Cell Stack

Diagnosis and mechanism analysis of startup-shutdown-induced fuel cell degradation in stack-level

Identification of failed cells inside PEMFC stacks in two cases: Anode/cathode crossover and anode/cooling compartment leak

Carbon corrosion induced fuel cell accelerated degradation warning: From mechanism to diagnosis

A novel diagnostic methodology for fuel cell stack health: Performance, consistency and uniformity

The Uniformity and Consistency Analysis of a Fuel Cell Stack with Multipoint Voltage-Monitoring Method

Novel Analytic Method of Membrane Electrode Assembly Parameters for Fuel Cell Consistency Evaluation by Micro-Current Excitation

Micro-current Excitation for Efficient Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks: Error Analysis and Method Optimization

Fuel cell system degradation analysis of a Chinese plug-in hybrid fuel cell city bus

Investigation of nonlinear accelerated degradation mechanism in fuel cell stack under dynamic driving cycles from polarization processes

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy

Characteristic Analysis of Fuel Cell Decay Based on Actual Vehicle Operating Conditions

Analytical Methods for the Effect of Anode Nitrogen Concentration on Performance and Voltage Consistency of Proton Exchange Membrane Fuel Cell Stack

Improved Methods to Measure Hydrogen Crossover Current in Proton Exchange Membrane Fuel Cell

Rapid Synchronous State-of-health Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks

Quantification on Degradation Mechanisms of Polymer Exchange Membrane Fuel Cell Cathode Catalyst Layers During Bus and Stationary Durability Test Protocols

Analytical Solution of the Charge Conservation Equation for Fuel Cells by Galerkin Method: Comments on “on the Interchangeability of Potentiostatic and Galvanostatic Boundary Conditions for Fuel Cells” by A.K. Sharma, E. Birgersson, M. Vynnycky, H. Ly [electrochim. Acta 109 (2013) 617–622]