Abstract:The durability of proton exchange membrane fuel cell stacks is a key limiting factor in transportation application due to severe conditions, where startup-shutdown and local fuel starvation most severely threaten the structure stability. In this paper, potentiostatic test at the average of 1.4 V is conducted to accelerate the carbon corrosion and structure damage in the cathode in a seven-cell commercial stack. A complete diagnosis framework based on micro-current excitation is established to systematically and in-situ evaluate the state-of-health of the cathode and the membrane, the mass transfer state, and the cell inconsistency in stack-level. Afterwards, the structure damage of cathode catalyst layer is characterized with scanning electron microscopy and energy disperse spectroscopy to provide direct evidences. In the early stage, the electrochemical surface area attenuates severely attributed to detachment and agglomeration of Pt particles, and the catalyst layer framework becomes more porous and hydrophilic, thus raising the double-layer capacitance. The weak catalyst layer structure tends to collapse starting from the lower layer close to the membrane, thereby leaving the dense lower layer and the porous upper layer in all cells. The damage mode is accurately manifested by the stepwise increase in the hydrogen transfer coefficient in the cathode that is identified in electrochemical testing. Meanwhile, the per-formance decay during operation exhibits typical characteristics of water flooding deterioration, as indicated by the three stages of steady voltage decay, drastic and periodic voltage fluctuation, and cell reversal. Therefore, the increase in water sensitivity and its dominant role in startup-shutdown-induced degradation are confirmed, which are also supported by the carbon-corrosion-induced ionomer agglomeration surrounding the enlarged pores in the upper layer. The enlarged pores are prone to be flooded, and the collapsed partial structure inherently limits the mass transfer. The aging process, evolution mechanisms of internal damage, and dominant factors during startup-shutdown are therefore identified and clearly revealed in stack-level.

Rapid Synchronous State-of-health Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks

Micro-current Excitation for Efficient Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks: Error Analysis and Method Optimization

Novel Analytic Method of Membrane Electrode Assembly Parameters for Fuel Cell Consistency Evaluation by Micro-Current Excitation

Use of galvanostatic charge method as a membrane electrode assembly diagnostic tool in a fuel cell stack

Diagnosis of Membrane Electrode Assembly Degradation with Drive Cycle Test Technique

Internal Microscopic Diagnosis of Accelerated Aging of Proton Exchange Membrane Water Electrolysis Cell Stack

A double-fuzzy diagnostic methodology dedicated to online fault diagnosis of proton exchange membrane fuel cell stacks

Fault Diagnosis for Proton Exchange Membrane Fuel Cell Systems Via Improved Equivalent Circuit Model and Multiple Support Vector Machines

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

Diagnosis Methods Dedicated to the Localisation of Failed Cells Within PEMFC Stacks

Recovery characteristics of reversible degradation for proton exchange membrane fuel cell stack under accelerated stress test

Diagnosis and mechanism analysis of startup-shutdown-induced fuel cell degradation in stack-level

Study on the Effect of Membrane Electrode Assembly Parameters on Polymer Electrolyte Membrane Fuel Cell Performance by Galvanostatic Charging Method

Proton Exchange Membrane Fuel Cell Stack Consistency: Evaluation Methods, Influencing Factors, Membrane Electrode Assembly Parameters and Improvement Measures

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

A double-fuzzy diagnostic methodology dedicated to online fault diagnosis of PEMFC stacks

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

Fast Fault Diagnosis for Proton Exchange Membrane Fuel Cells Based on an Electrochemical Impedance Spectroscopy Measurement

An efficient multi-point impedance method for real-time monitoring the working state of solid oxide fuel cells

Dynamic Inconsistent Analysis and Diagnosis of Abnormal Cells Within a High-power Fuel Cell Stack

A novel diagnostic methodology for fuel cell stack health: Performance, consistency and uniformity