Abstract:The durability of proton exchange membrane fuel cell stacks is a key limiting factor in transportation application due to severe conditions, where startup-shutdown and local fuel starvation most severely threaten the structure stability. In this paper, potentiostatic test at the average of 1.4 V is conducted to accelerate the carbon corrosion and structure damage in the cathode in a seven-cell commercial stack. A complete diagnosis framework based on micro-current excitation is established to systematically and in-situ evaluate the state-of-health of the cathode and the membrane, the mass transfer state, and the cell inconsistency in stack-level. Afterwards, the structure damage of cathode catalyst layer is characterized with scanning electron microscopy and energy disperse spectroscopy to provide direct evidences. In the early stage, the electrochemical surface area attenuates severely attributed to detachment and agglomeration of Pt particles, and the catalyst layer framework becomes more porous and hydrophilic, thus raising the double-layer capacitance. The weak catalyst layer structure tends to collapse starting from the lower layer close to the membrane, thereby leaving the dense lower layer and the porous upper layer in all cells. The damage mode is accurately manifested by the stepwise increase in the hydrogen transfer coefficient in the cathode that is identified in electrochemical testing. Meanwhile, the per-formance decay during operation exhibits typical characteristics of water flooding deterioration, as indicated by the three stages of steady voltage decay, drastic and periodic voltage fluctuation, and cell reversal. Therefore, the increase in water sensitivity and its dominant role in startup-shutdown-induced degradation are confirmed, which are also supported by the carbon-corrosion-induced ionomer agglomeration surrounding the enlarged pores in the upper layer. The enlarged pores are prone to be flooded, and the collapsed partial structure inherently limits the mass transfer. The aging process, evolution mechanisms of internal damage, and dominant factors during startup-shutdown are therefore identified and clearly revealed in stack-level.

A novel diagnostic methodology for fuel cell stack health: Performance, consistency and uniformity

The Uniformity and Consistency Analysis of a Fuel Cell Stack with Multipoint Voltage-Monitoring Method

Dynamic Inconsistent Analysis and Diagnosis of Abnormal Cells Within a High-power Fuel Cell Stack

A multipoint voltage-monitoring method for fuel cell inconsistency analysis

Diagnosis Methods Dedicated to the Localisation of Failed Cells Within PEMFC Stacks

Rapid Synchronous State-of-health Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks

In-situ Characterization of Gas Distribution in Proton Exchange Membrane Fuel Cell Stacks

A double-fuzzy diagnostic methodology dedicated to online fault diagnosis of proton exchange membrane fuel cell stacks

A comprehensive investigation on performance heterogeneity of commercial-size fuel cell stacks during dynamics operation

Diagnosis and mechanism analysis of startup-shutdown-induced fuel cell degradation in stack-level

Analytical Methods for the Effect of Anode Nitrogen Concentration on Performance and Voltage Consistency of Proton Exchange Membrane Fuel Cell Stack

Design of a Fuel Cell Test System with Fault Identification

Novel Analytic Method of Membrane Electrode Assembly Parameters for Fuel Cell Consistency Evaluation by Micro-Current Excitation

Micro-current Excitation for Efficient Diagnosis of Membrane Electrode Assemblies in Fuel Cell Stacks: Error Analysis and Method Optimization

A Method to Study the Intake Consistency of the Dual-Stack Polymer Electrolyte Membrane Fuel Cell System under Dynamic Operating Conditions

Investigation on the Performance Heterogeneity Within a Fuel Cell Stack Considering Non-Isopotential of Bipolar Plates

A double-fuzzy diagnostic methodology dedicated to online fault diagnosis of PEMFC stacks

Comprehensive analysis of galvanostatic charge method for fuel cell degradation diagnosis

A CFD‐based manifold design methodology for large‐scale PEM fuel cell stacks

Use of galvanostatic charge method as a membrane electrode assembly diagnostic tool in a fuel cell stack

A novel multi-step investigation of in-plane heterogeneity for commercial-size fuel cells based on current distribution model and multi-point impedance method