Abstract:Underwater inspection is important to ensure the safety, integrity and functionality of underwater structures. Although numerous conventional methods have been adopted for underwater inspection, successful application of most methods relies on the surface condition of the object, which, however, is typically covered by marine growth. Consequently, routine inspection requires thorough cleaning of marine growth, which is time-consuming and costly. Hence a method which can inspect objects without the need for extensive surface cleaning is necessary. Two methods have the potential to achieve this: pulse eddy current (PEC) and electromagnetic acoustic transducer (EMAT). PEC attains a significant lift-off distance, enabling inspection through marine growth. However, it suffers from high sensitivity to environmental conditions and low inspection accuracy due to 'relative' property which means its results are interpreted by comparing received signals to reference values. In contrast to PEC, EMAT provides 'absolute' measurements, ensuring precise results in the inspection. But it is limited by a small lift-off distance (<2∼3 mm), rendering it unsuitable for underwater applications with marine growth. Therefore, if the lift-off distance can be enhanced to a specific value, this method may offer a superior solution for underwater inspections. In this paper, a quantitative measurement method is proposed through employing a shear wave EMAT with high lift-off performance. A repelling configuration of magnets is introduced to achieve a significantly improved maximum effective lift-off distance of up to 5 mm in both air and seawater conditions with only 400 Vpp applied. This EMAT is then demonstrated to measure thickness through marine growth, showing excellent underwater performance in quantitative thickness mapping for corrosion inspection.

Embedded Microelectrode for in Situ Electrochemical Impedance Spectroscopy Measurement of Organic Coating under Marine Alternating Hydrostatic Pressure

A New Electroplated Ir/Ir（OH） X Ph Electrode and Its Application in the Coastal Areas of Newport Harbor, California

Material Selection in Making Electrochemical Impedance Spectroscopy Sensor for Electrolyte Thickness Measurement in Marine Atmosphere

Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements under Marine Alternating Hydrostatic Pressure

A novel design of electrochemical noise configuration based on embedded-electrodes for in-situ evaluation of epoxy coating under marine alternating hydrostatic pressure

Electochemical Measuments of Defective Coatingson Buried Steel Substrates

Development of a Device for Field Measurement of Electro- chemical Impedance Spectra of Coatings and Reinforced Concrete

Electrochemical Corrosion Behavior of Silicone-epoxy Hybrid Coatings on LY12 Aluminum Alloy Electrode

Through Coating Imaging and Nondestructive Visualization Evaluation of Early Marine Corrosion Using Electromagnetic Induction Thermography

Development on Electrochemical Impedance Spectroscopy Technology in Metal Corrosion and Coating Anticorrosion

Impedance Sensor for the Early Failure Diagnosis of Organic Coatings

Influence of Organic Coating Thickness on Electrochemical Impedance Spectroscopy Response

Maintenance-free antifouling polymeric membrane potentiometric sensors based on self-polishing coatings

Impedance-Based Wireless Sensor Network For Metal-Protective Coating Evaluation

A design of watertight electronic cabin for in-situ electro-chemical measurement under deep sea condition

Evaluation of Coating Resistivity for Pigmented/unpigmented Epoxy Coatings under Marine Alternating Hydrostatic Pressure

Smart cathodic protection system for real-time quantitative assessment of corrosion of sacrificial anode based on Electro-Mechanical Impedance (EMI)

Underwater quantitative thickness mapping through marine growth for corrosion measurement using shear wave EMAT with high lift-off performance

Electrochemical Measurements Using Combination Microelectrode in Crevice Simulating Disbonded of Pipeline Coatings under Cathodic Protection

Fabrication of an All-Solid-State Carbonate Ion-Selective Electrode with Carbon Film as Transducer and Its Preliminary Application in Deep-Sea Hydrothermal Field Exploration

Application of Local Electrochemical Impedance Spectroscopy (LEIS) on Assessing the Environmental Failure of Organic Coatings