Abstract:AC impedance measurements have been applied for over twenty years in electrochemistry and physics to investigate the electrical properties of conductive materials and their interfaces using an external electrical impulse (VOLTAGE, V or CURRENT, I) as driving force. Furthermore, its application has recently appeared to be destined in the Biotechnology field as an effective tool for rapid microbiologic diagnosis of living organism in situ. However, there is no doubt that the electrochemical impedance spectroscopy (EIS) is still one of the most useful techniques around the world for metal corrosion control and its monitoring. Corrosion has long been recognized as one of the most expensive stumbling blocks that concern many industries and government agencies, because it is a steel destructive phenomenon that occurs due to the chemical interaction with aqueous environments and takes place at the interface between metal and electrolyte producing an electrical charge transfer or ion diffusion process. Consequently, it is experimentally possible to determine through the EIS technique the mechanism and control that kinectics of corrosion reactions encounter. First, EIS data is collected through a potentiostat/galvanostat apparatus. After, it is fitted to a mathematical model (i.e. an equivalent electrical circuit, EEC) for its interpretation and analysis, fundamentally seeking a meaningful physical interpretation. Finally, this review reports some basic aspects of the corrosion mechanism applied to steels through the experimental EIS response using Nyquist or Bode plots. Examples are given for different applied electrochemical impedance cases in which steel is under study intentionally exposed to a corrosive aqueous solution by applying a sinusoidal potential at various test conditions.

Development on Electrochemical Impedance Spectroscopy Technology in Metal Corrosion and Coating Anticorrosion

Electrochemical Impedance Spectroscopy (EIS): A Review Study of Basic Aspects of the Corrosion Mechanism Applied to Steels

Electrochemical impedance spectroscopy characteristics of steel corrosion in seawater sea-sand concrete

Application of EIS to localized corrosion

STUDY ON SOIL CORROSION OF CARBON STEEL BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY(EIS)

Electrochemical impedance spectroscopy of metals covered with a thin electrolyte layer

Electrochemical impedance spectroscopy during corrosion process of 8090 Al-Li alloy in EXCO solution

Electrochemical Impedance Spectroscopy Characteristics of Corrosion Behavior of Rebar in Concrete

Numerical Approach for Atmospheric Corrosion Monitoring Based on EIS of a Weathering Steel

Application of Electrochemical Impedance Technology in Research on Lithium-Ion Batteries

Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: A new approach

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Current Status of Image Recognition Technology in the Field of Corrosion Protection Applications

An Assessment of Commonly Used Equivalent Circuit Models for Corrosion Analysis: A Bayesian Approach to Electrochemical Impedance Spectroscopy

Influence of Organic Coating Thickness on Electrochemical Impedance Spectroscopy Response

Comparative Studies on the Deterioration Process of Organic Coatings under Immersed and Cyclic Wet-Dry Conditions by EIS

The Application of Electrochemical Noise for the Study of Metal Corrosion and Organic Anticorrosion Coatings: A Review

Development of an electrochemistry-based corrosion sensor to monitor corrosion of boiler tubes, pipes, and painted structures

Visualization of EIS at large potential range - new insights

Corrosion Electrochemical Characteristics of Red Iron Oxide Pigmented Epoxy Coatings on Aluminum Alloys

Use of Electrochemical Impedance Spectroscopy (EIS) to monitoring the corrosion of reinforced concrete