Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

Improving Particle Flow in Liquid-Solid Countercurrent Extraction Tower by Insert Structure Optimization: A Combined Study on Experiments and DEM Simulations

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Multi-Scale Study of Particle Flow in Silos

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Experimental Investigation on Drawdown of Floating Particles in Viscous Systems Driven by Coaxial Mixers

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Study on the Flow Characteristics of Mixed Solid–Solid Particles

Fluid–Solid Mixing Transfer Mechanism and Flow Patterns of the Double-Layered Impeller Stirring Tank by the CFD-DEM Method

Material Transport and Flow Pattern Characteristics of Gas–Liquid–Solid Mixed Flows

Numerical investigation on the intensification of coaxial slurry mixing systems

Investigation on Vertical Plug Formation of Coarse Particles in a Non-Mechanical Feeder by CFD-DEM Coupling Method

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

CFD Investigation on the Performance of Cyclone Separators with Divergent or Convergent Insertion Pipes

Flow Mechanisms and Solid Flow Rate Prediction of Powders Discharged from Hoppers with an Insert

Research on the Characteristics of the Solid–Liquid Two-Phase Flow Field of a Submersible Mixer Based on CFD-DEM

Flow Pattern Optimization of a Sieve Plate Extraction Column Using Computational Fluid Dynamics Simulations and Particle Image Velocimetry Measurements

Mixing Transport Mechanism of Three-Phase Particle Flow Based on CFD-DEM Coupling

CFD-DEM Modelling of Hydraulic Conveying of Solid Particles in a Vertical Pipe

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns

Numerical Investigation of Liquid Dispersion by Hydrophobic/hydrophilic Mesh Packing Using Particle Method