Abstract:Sapphire is one of the most widely used substrate materials for semiconductor lighting. With the improvement of chemical mechanical polishing (CMP) processing technology for sapphire substrate, mass production, and cost control requires faster polishing efficiency and better surface quality. In CMP, alumina abrasive is widely used for its high polishing rate, but it also has the disadvantages of easy agglomeration and poor polishing quality. Therefore, ethylenediamine tetraacetic acid (EDTA)-grafted alumina composite abrasives were produced by a two-step process for the sapphire substrate CMP. As demonstrated by time of flight secondary ion mass spectrometry and fourier transform infrared spectroscopy, EDTA has been successfully grafted onto the surface of alumina particles. As shown by the scanning electron microscope, particle size distribution, and zeta potential analyses, the modified alumina composite abrasives exhibit superior dispersion properties than pure alumina particles. CMP experiment results show that the material removal rate (MRR) of the alumina composite abrasives can reach up to 2.6 μm/h, and the surface roughness (Sa) of the sapphire substrate can be reduced to 0.89 nm, which is 53 % higher and 66 % lower than pure alumina, respectively. According to X-ray photoelectron spectroscopy, the chemical etch of modified abrasive particles was strengthened, and the complex reaction occurred throughout the CMP process to generate the C–O–Al structural compound. Meanwhile, the friction coefficient test and contact angle test were combined to create the contact wear model. It shows that the addition of EDTA expands the contact area between the composite abrasives and the surface of substrates, improving the mechanical interaction during CMP. The chemical reaction and mechanical action combine and promote each other to enhance the CMP performance.

Preparation of a Novel Catalyst (sofeiii) and Its Catalytic Performance Towards the Removal Rate of Sapphire Substrate During CMP Process

Fe-Nx/C Assisted Chemical–mechanical Polishing for Improving the Removal Rate of Sapphire

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Chemical mechanical polishing for sapphire wafers using a developed slurry

Chemical Mechanical Planarization (cmp) of On-Axis Si-Face Sic Wafer Using Catalyst Nanoparticles in Slurry

Study on Chemical Mechanical Polishing Performances of Sapphire Wafer (0001) Using Silica-Based Slurry

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Realization of atomic-level smooth surface of sapphire (0001) by chemical-mechanical planarization with nano colloidal silica abrasives

Machining performance and material removal mechanism of sapphire with novel polishing slurry

An in Situ Study of Chemical-Mechanical Polishing Behaviours on Sapphire (0001) Via Simulating the Chemical Product-Removal Process by AFM-tapping Mode in Both Liquid and Air Environments

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Photocatalysis-Assisted Chemical Mechanical Polishing of SiC Wafer Using a Novel SiO2@TiO2 Core-Shell Composite Nanoparticles Slurry

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

A novel slurry for chemical mechanical polishing of single crystal diamond

Effect of EDTA-modified alumina composite abrasive on the CMP performance of sapphire substrate

Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate

Preparation of Silane Modified Sio2 Abrasive Particles and Their Chemical Mechanical Polishing (cmp) Performances

Chemical Mechanical Polishing (CMP) of SiC Wafer Using Photo-Catalyst Incorporated Pad

Improvement in chemical mechanical polishing of 4H-SiC wafer by activating persulfate through the synergistic effect of UV and TiO2

A Study of Chemical Products Formed on Sapphire (0001) During Chemical–mechanical Polishing