Abstract:The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

Research on the Current Commutation in a Novel Hybrid HVDC Circuit Breaker

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

Current-transferring High Voltage DC Breaker

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Novel Hybrid DC Circuit Breaker Based on Series Connection of Thyristors and IGBT Half-Bridge Submodules

Research on the Breaking Branch for a Hybrid DC Circuit Breaker In±500 Kv Voltage‐sourced Converter High‐voltage Direct Current Grid

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

Research and Development of 500kv Hybrid HVDC Circuit Breaker with Current Commutation Drive Circuit

Research On A Novel Bidirectional Direct Current Circuit Breaker

Research On A Novel Two-Stage Direct Current Hybrid Circuit Breaker

Development of a Novel HVdc Circuit Breaker Combining Liquid Metal Load Commutation Switch and Two-Stage Commutation Circuit

Research On Current Commutation Measures For Hybrid Dc Circuit Breakers

Research on a Current Commutation Drive Circuit for Hybrid Dc Circuit Breaker and Its Optimisation Design

Technical Assessment on Self-Charging Mechanical HVDC Circuit Breaker

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Hybrid HVDC Circuit Breaker Based on Series-connected Thyristors with Forced Zero Crossing Technique

A dc hybrid circuit breaker based on two-stage commutation

The Design and Development of a Novel 10 Kv/60 Ka Hybrid DC Circuit Breaker Based on Mixed Solid-State Switches

A novel multi-port hybrid high voltage DC circuit breaker commutated by controllable active oscillation circuit

A 320kV hybrid HVDC circuit breaker based on thyristors forced current zero technique

A Hybrid Circuit Breaker with Fault Current Limiter Circuit in a VSC-HVDC Application