Abstract:High voltage power switches are needed for medium-voltage (MV) grid applications such as Solid-state Transformers. The series-connection of low voltage devices is a cost-effective alternative approach to achieve higher blocking voltages. Furthermore, all reported high voltage SiC switches to date are unidirectional voltage blocking devices. Additional devices or power stages such as unfolding bridges are needed for MV AC applications. Combining high blocking voltage and bidirectional operation capability into one single module is, therefore, very attractive for future MV AC applications. This paper proposes a forced-air cooled 15 kV/50 A SiC AC switch based on the series-connection of 1700 V SiC MOSFETs. The AC switch consists of two identical parts connected source-to-source. Each part includes ten 1700 V SiC MOSFETs in series. Each set of ten SiC MOSFETs are driven by a common gate signal. A quantitative switching transient model is developed to expound on how multiple critical factors affect the voltage balancing during the switching transient. A preliminary voltage balancing performance is predicted using the proposed model. A dynamic balancing dV/dt snubber capacitor is then designed to achieve satisfactory voltage balance. A 10.5 kV/30 A double pulse test (DPT) is carried out to verify the feasibility of the designed AC switch and the validity of the proposed switching model. Necessary electrical characteristics of the fabricated 15 kV SiC AC switch are characterized for future applications. Auxiliary gate power supplies with 30 kV galvanic isolation capability are designed to support the intended MV applications. Based on the 15 kV SiC AC switch, a 7.2 kVac/100 kVA series resonant converter is developed and experimentally demonstrated to further verify the feasibility of the proposed device stacking technology.

Continuous Switching Operation of 15 Kv FREEDM Super-Cascode

15-Kv/40-a FREEDM Supercascode: A Cost-Effective SiC High-Voltage and High-Frequency Power Switch

ZVS range extension of 10A 15kV SiC MOSFET based 20kW Dual Active Half Bridge (DHB) DC-DC converter

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

3.38 Mhz Operation of 1.2kv SiC MOSFET with Integrated Ultra-Fast Gate Drive

15-Kv/50-a SiC AC Switch Based on Series Connection of 1.7-Kv MOSFETs

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

10 Kv SiC MOSFET Based Boost Converter

Development of 6kv SiC Hybrid Power Switch Based on 1200V SiC JFET and MOSFET

Sic Mosfet Zero-Voltage-Switching Svm Controlled Three-Phase Grid Inverter

A Normally-off Copackaged SiC-JFET/GaN-HEMT Cascode Device for High-Voltage and High-Frequency Applications

7.2-Kv/60-a Austin SuperMOS: an Enabling SiC Switch Technology for Medium Voltage Applications

6.5Kv Freedm-Pair: Ideal High Power Switch Capitalizing on Si and Sic

Design and Application of A 1200v Ultra-Fast Integrated Silicon Carbide Mosfet Module

15 Kv SiC MOSFET: an Enabling Technology for Medium Voltage Solid State Transformers

Fabrication and testing of 3500V/15A SiC JFET based power module for high-voltage, high-frequency applications

High Efficiency High Density 1 MHz 380–12 V DCX with Low FoM Devices

Analysis on Ultra-Fast Switching of SiC MOSFETs for Megahertz Applications Enabled by 3D Package and Embedded Components

High-voltage full-SiC power module: Device fabrication, testing and high frequency application in kW-level converter

Characterization, Modeling, and Application of 10-kV SiC MOSFET