Abstract:Cu(In,Ga)Se-2 (CIGS) is a widely investigated material for thin film solar cells in the last decade. However, it has the concern of short availability of constituent elements (e.g. In, Ga) which limits its development. Research focused on new substitute of light absorber is eagerly needed. As an earth-abundant semiconductor, CZTS (Cu2ZnSnS4) has attracted considerable interest recently. CZTS has lots of similarities to CIGS, and is considered to be a promising material in the field of thin film solar cells owning to its fascinating optoelectronic properties, low-cost fabrication, and non-toxic nature. In this article, after introducing the features of CZTS material and the basic structure of CZTS thin film solar cells, different methods for the fabrication of CZTS thin films, as well as the corresponding device performance are discussed. CZTS thin film fabrication methods include vacuum based approaches and non-vacuum based approaches, with the former usually has the advantage of easy control of the chemical composition as well as good reproducibility; and the latter often has merits of low-cost, less-energy consumable, and suitable for large area deposition. Firstly, vacuum based approaches, including sputtering, evaporation and pulsed laser deposition, are discussed. Secondly, according to the different condition of the precursors, three subtypes of non-vacuum based approaches are presented (nanoparticle ink precursors, solution precursors, mixture precursors of solution and nanoparticle ink). Meanwhile, corresponding device efficiencies are summarized. Up to date, the power conversion efficiencies of 12.6% for CZTS based solar cells have been achieved, which is enormously encouraging. The new champion device was fabricated using a recently described hydrazine pure-solution approach, which significantly improves the coating uniformity and film structure. What's more, various film treatment strategies to optimize the CZTS thin film, such as selenization/sulfurization and elemental composition tuning (e.g. S/Se, Zn/Cu), are outlined here; the focus of future research and development are proposed.

Fabrication of Cu2ZnSn(S,Se)4 absorber films by selenization of different Cu2ZnSnS4 nanocrystal coatings

Fabrication, Characterization and Application of Cu2ZnSn(S,Se)4 Absorber Layer Via a Hybrid Ink Containing Ball Milled Powders

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

A Robust Approach to Fabricate CZTSSe Absorber Layer for Solar Cells Via a Self-Selenizations Process Conducted by Concentrated Selenium Solution

Fabrication of Cu2ZnSnS4 (CZTS) Absorber Films Based on Different Compound Targets

A Non-Vacuum Solution Route to Prepare Amorphous Metal Oxides Thin Films for Cu2znsn(S,Se)(4) Solar Cells

GROWTH OF Cu2ZnSn(S,Se)4 THIN FILMS BY A SIMPLE ECO-FRIENDLY SOLUTION ROUTE METHOD

Fabrication of Cu2ZnSn(S,Se)4 (CZTSSe) absorber films based on solid-phase synthesis and blade coating processes

Segmented Control of Selenization Environment for High‐Quality Cu2ZnSn(S,Se)4 Films Toward Efficient Kesterite Solar Cells

Fabrication of Earth-Abundant Cu2ZnSn(S,Se)4 Light Absorbers by a Sol–gel and Selenization Route for Thin Film Solar Cells

Fabrication of Cu2ZnSn(S,Se)4 thin film solar cells by selenization of reactively sputtered precursors

Achieving 11.95% Efficient Cu2ZnSnSe4 Solar Cells Fabricated by Sputtering a Cu-Zn-Sn-Se Quaternary Compound Target with a Selenization Process

Improving the Performance of Solution-Based CZTSSe Absorber by Selenization Annealing with Selenium Powder in Argon

Cu2 ZnSn(S1-x Se x )4 thin film solar cells prepared by water-based solution process

Sol-gel synthesis of Cu2ZnSnS4 thin films under mild conditions

Eliminating Cracking Morphology of Solution-Processed CZTSSe Absorbers by Sn-rich Composition Engineering

Progress in the Fabrication of Cu 2 ZnSnS 4 Thin Film for Solar Cells

Synthesis of Cu2ZnSnSe4 thin film solar cells from nanoparticles by a non-vacuum mechanical ball milling and rapid thermal processing

Cu2ZnSn(S1–xSex)4 thin film solar cells prepared by water‐based solution process

Controlling selenization equilibrium enables high-quality Cu2ZnSn(S, Se)4 absorbers for efficient solar cells

On the Growth Process of Cu2ZnSn(S,Se)4 Absorber Layer Formed by Selenizing Cu–ZnS–SnS Precursors and Its Photovoltaic Performance