Abstract:Multi-layer crystallization and uncontrollable defects were the main factors that limiting the quality of Cu 2 ZnSn(S,Se) 4 (CZTSSe) films. Here a hybrid crystallization strategy was proposed to simultaneously improve the morphology and defect properties of CZTSSe film. Firstly, we found the variation of the microstructures (constitution, chemical environment of the elements, etc.) in precursor films can greatly alter the grain-growths of CZTSSe films. Detailed characterizations revealed that the chemical environment of S in the precursor film may influence the S-to-Se substitution of the film during the selenization process. This can further affect the grain-growth mechanism and the properties of CZTSSe film. While the S-to-Se substitution of the film mainly occurred below 500°C, the NaSe x on the surface of the film could dominate the grain-growth (Na-mechanism). For this mechanism, the CZTSSe film exhibited bi-layer morphology and relatively high band-tail energy, but shallow-acceptor was detected in the film. The solar cells based on the CZTSSe films reached the efficiency of 10.6%. As a comparison, liquid phase could be generated when the S-to-Se substitution of the film shifted to higher temperature (>500°C). In this condition, the grain-growth would be dominated by the liquid phase (LP-mechanism). Such mechanism can eliminate the multi-layer crystallization and reduce the band-tail energy, but the surface properties of the CZTSSe film was deteriorated and the formation of shallow-acceptor in CZTSSe was inhibited. The fabricated solar cells achieved the efficiency of 10.3%. Based on the results above, a bi-layer precursor film contained sub-layers with different microstructures was proposed to regulate the crystallization of CZTSSe. The co-existence of different microstructures in the precursor film could induce a hybrid grain-growth mechanism for the CZTSSe film (e.g., the Na-mechanism worked on the surface while the LP-mechanism worked in the bottom simultaneously). Such grain-growth mechanism can yield CZTSSe film with uniform morphology and favorable defect properties. The CZTSSe solar cells based on the hybrid grain-growth mechanism achieved the best efficiency of 12.6%. The investigation in this paper would provide new solutions for the crystallization regulation on CZTSSe photovoltaic material.

Facile growth of Cu2ZnSn(SSe)4 thin films with controlled phase and microstructure evolution from green ethanol-based molecular solutions

Fabrication of Cu2ZnSn(S,Se)4 absorber films by selenization of different Cu2ZnSnS4 nanocrystal coatings

Structural and Optical Properties of the Cu2znsnse4 Thin Films Grown by Nano-Ink Coating and Selenization

Facile growth of kesterite CZTS film by one-pot hydrothermal route using EDTA as complex agent for heterojunction solar cell applications: influence of zinc concentration

Optimized grain growth for efficient solution-processed Bi-doped Cu2ZnSn(S,Se)4 thin film solar cells via spin-coated layers adjustment and two-step selenization

Study on formation and characterization of kesterite CZTSSe thin films deposited by thermal evaporation technique for solar cell applications

A Study on Optoelectronic Properties of Copper Zinc Tin Sulfur Selenide: A Promising Thin‐Film Material for Next Generation Solar Technology

Facile Growth of Cu2ZnSnS4 Thin-Film by One-Step Pulsed Hybrid Electrophoretic and Electroplating Deposition

Fabrication and Characterization of Cu2ZnSnSe4 Thin-Film Solar Cells Using a Single-Stage Co-Evaporation Method: Effects of Film Growth Temperatures on Device Performances

Tuning Bandgap of p-Type Cu 2 Zn(Sn, Ge)(S, Se) 4 Semiconductor Thin Films via Aqueous Polymer-Assisted Deposition.

Current Status and Future Prospects of Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) Thin Film Solar Cells Prepared via Electrochemical Deposition

Solution transformation of SnS into Cu2ZnSnS4xSe4(1-x) for solar water splitting

Environmentally Friendly Synthesis of Copper Zinc Tin Sulfide (CZTS) Thin Film Solar Cells: Advancing Sustainable Photo-Energy Conversion with Low-Temperature Chemical Processing

Optical and Electrical Properties Study of Sol-Gel Derived Cu2znsns4 Thin Films for Solar Cells

Improving the performance of low-cost water-based solution-synthesised Cu2ZnSn1-Ge (S,Se)4 absorber thin films by germanium doping

Preparation and characterization of Cu2ZnSnSe4 thin films by selenization of electrodeposited metal precursors

Study of optical and structural properties of CZTS thin films using copper capping layer and sulfurization to correct stoichiometry.

Fabrication of Cu 2 ZnSnS 4 thin films using oxides nanoparticles ink for solar cell

Reaction Time and Film Thickness Effects on Phase Formation and Optical Properties of Solution Processed Cu2ZnSnS4 Thin Films

Benign Solutions and Innovative Sequential Annealing Processes for High Performance Cu2ZnSn(Se,S)4 Photovoltaics

Simultaneously improving the morphology and defect properties of CZTSSe film via hybrid grain-growth mechanism