Abstract:Certain polymers, such as polyvinylidene fluoride (PVDF), polyimide (PI), and poly (phthalazinone ether sulfone ketone) (PPESK), are commonly used separator materials in batteries. However, during the thermal runaway (TR) processing of batteries, significant heat is released by the combustion of the polymer separator. Therefore, analysis of the fire behaviors of polymer separator materials will facilitate a more comprehensive quantitative evaluation of battery thermal risk. This paper investigated the combustion properties of three types of polymers, namely, PVDF, PI, and PPESK, as potential separator materials by cone calorimetry and thermogravimetry (TG). A series of characteristic parameters, including ignition time (TTI), heat release rate (HRR), smoke production rate (SPR), and total heat release (THR), were evaluated for three polymers and blends (PI/PVDF, PPESK/PVDF) under an external heat flux of 45 or 60 kW/m2, respectively. The combustion characteristics and fire hazards of the three polymers and corresponding mixtures were analyzed through the comparative analysis of experimental data and phenomena. Under 60 kW/m2, the HRR curves of all polymers presented two peaks, while PI/PVDF and PPESK/PVDF mixtures exhibited one obvious peak. Moreover, the peak HRR (pHRR) for the mixed polymers was higher, indicating a relatively higher fire risk. However, in the application scenario, the mixed state represents the main polymer form as the active separator materials in batteries. The results showed that the specific coupling behaviors were related primarily to the component type. This work will help evaluate the fire risk of polymeric separator materials based on the combustion characteristics to predict the safety of mixtures in batteries and develop new methods for fire suppression.

Experimental Study on Fire Behaviors of Flexible Photovoltaic Panels Using a Cone Calorimeter

Experimental Study on Burning Behaviors of Photovoltaic Panels with Different Coverings Using a Cone Calorimeter

A New Hybrid Heating Method Used in Fire Test

Impact of Sliding Window Opening Sizes and Crosswinds on Combustion Characteristics of Polyethylene Sandwich Panels in External Venting Façade Fires

Performance of photovoltaic panels with different inclinations under uniform thermal loading

Experimental Study on Effects of Burning Behaviours of Materials Caused by External Heat Radiation

Spread Behavior of Spill Fire under Lateral Wind and Temperature Distribution of PE Sandwich Panels on Facade

Impact of core thickness and opening height on the combustion characteristics of polyethylene sandwich panels

Fire Spread Characteristics of Metal-Polyethylene Sandwich Panels

Risk of photovoltaic systems on building fire safety in China

Research on the Fire Behaviors of Polymeric Separator Materials PI, PPESK, and PVDF

Study on Combustion Characteristics of Ceiling Materials Using Cone Calorimeter

Correlation analysis of heat flux and cone calorimeter test data of commercial flame-retardant ethylene-propylene-diene monomer (EPDM) rubber

Thermodynamic and Kinetic Characteristics of Combustion of Discrete Polymethyl Methacrylate Plates with Different Spacings in Concave Building Facades

Combustion Behaviour and Dominant Shrinkage Mechanism of Flexible Polyurethane Foam in the Cone Calorimeter Test.

Influence of Fire Partitions on Reaction-to-Fire Properties and Fire Spread Properties of Metal-Skinned Expandable Polystyrene Sandwich Panel

Study on the flammability and thermal degradation of a novel intumescent flame retardant EPDM composite

Temperature field study and numerical computation of carbon fiber epoxy composite materials under unilateral thermal radiation

A Review of Combustion and Flame Spread over Thermoplastic Materials: Research Advances and Prospects

Experimental study of phase change material heat sinks coupled with Cantor fractal fins for thermal management of photovoltaic systems

On the orientation effect on the flame spread over discrete fuel using a mass-transfer number