Abstract:Building external walls and fire insulation are important components of a low carbon economy. Once a fire occurs in the building, the ejected flame from the opening of the building can easily ignite the building external wall insulation materials and further resulting the catastrophic large-scale facade fire. The paper investigates experimentally the temperature evolution within fire compartment, the external flame merging behavior and the structure characteristic (height/area) ejected through multiple-openings comprehensively for various numbers of openings and separation distances (with a fixed overall opening size) and fire heat release rates with a total of 272 conditions. A rectangle reduced-scale fire compartment and an external facade was designed with various multi-opening conditions (numbers of openings, separations). Results show that the upper-part temperature within fire compartment first increases and then changes a little around 1000 K, it is correlated well by the heat release rate and heat loss per unit time for over-ventilated conditions, while it correlated well with the opening factor for under-ventilated condition. Regardless of the number of openings, it only depends on the overall opening size. The external flame merging probability increases (from 0 to 1) with increasing number of openings and fire HRR, which correlated well as a function of the non-merging flame height from a single opening (or the flame upward velocity) and the separation distances between the adjacent two openings. The external flame height decreases (about from 1.0 m to 0.3 m) with increasing number of openings. A new characteristic length scale, considering the multiple rectangle fire sources at the neutral plane was proposed to describe the external flame height. The external flame area is further estimated based on the flame height and the merging probability. The experimental data and correlations obtained in this paper contribute a fundamental basis for quantifying the characteristics of the building fire, selection of building external wall insulation materials and building energy saving.

Impact of Sliding Window Opening Sizes and Crosswinds on Combustion Characteristics of Polyethylene Sandwich Panels in External Venting Façade Fires

Impact of core thickness and opening height on the combustion characteristics of polyethylene sandwich panels

Spread Behavior of Spill Fire under Lateral Wind and Temperature Distribution of PE Sandwich Panels on Facade

Effect of Width on the Fire Spreading Characteristics of PE Metal Sandwich Panels under the Action of Double Fire Sources

Temperature Evolution Within Fire Compartment, External Flame Structure Characteristic and Merging Behavior with Multiple-Openings

Evolutions of Gas Temperature Inside Fire Compartment and External Facade Flame Height with a Casement Window

Facade Flame Height and Horizontal Extending Distance from Opening of Compartment Fire with External Sideward Wind

Study on the Fire Characteristics of the Compartment with Two Opposing Openings under External Sideward Wind

Experimental Study on Cross-ventilation Compartment Fire in the Wind Environment

A Study on the Impact of Window Partition Walls on the Spread of Fire on Building Facades

Experimental study of fire growth and ejected plume in a cross-ventilation compartment under wind condition

Facade Flame Height Ejected from an Opening of Fire Compartment under External Wind

Experimental study of the downward flame spreading characteristics of building facade flexible polyurethane with a lateral environment wind effect

Experimental Study on the Heat Flux Profile Upon the Building Facade of the Window-Ejected Fire Plume

Experimental Study of Ejected Fire Plume from an Opening under Facing Wind Passing Through the Roof

Wind Tunnel Tests on Compartment Fires with Crossflow Ventilation

External Wind Effect on Flame Behavior Inside and Outside a Compartment with Opposing Openings

Facade Flame Height Ejected from Opening of a Compartment under the Coupling Effect of Side Walls and Ambient Wind

Fire Spread Characteristics of Metal-Polyethylene Sandwich Panels

Effect of Spacing on the Flame Propagation Characteristics of PE/Metal Sandwich Insulation Panels

An Experimental Study on Vertical Temperature Profile of Facade Fire Plume Ejected from Compartment with an Opening Subjected to External Wind Normal to Facade