Abstract:In the present work,burning behaviors of plant leaf samples were studied using a cone calorimeter,with a focus on exploring the reasons behind the phenomena observed.Piloted ignition measurements were performed at the radiant heat flux of 35,55,70 and 85 kW m-2,respectively.Coniferous and broadleaved plant species of 13 kinds in total were used,with their moisture content varying from 45% to 79%.Measurement results show that the samples underwent ignition in two major modes,flaming or smoldering,depending on the plant species and the radiant heat flux.The critical peak value of heat release rate(PHRR) for flaming combustion was found to fall in the range between 22.3 and 35.6 kW m-2,reflecting the minimum volatile mass flow rate required for establishing a flame.Excellent linear correlation was observed between the values of PHRR and the peak rates of CO2 produced,indicating the similarity in the gas-phase combustion reactions and oxidation on the solid surfaces for various leaf samples.Further analysis suggested that the unique pattern in the HRR curves is the compromised result affected by the layered feature of the samples in conjunction with their physical and thermal properties.At the beginning of a test,the surface layer of a sample with thermally-thin property intercepts external radiant heat,and its pyrolysis products are responsible for the formation of a flame in the gas phase.After its transforming into a char layer,it plays a role in blocking the external heat flowing into the internal layers.The established understanding provides guidance for the assessment of the combustibility of layered fuels.

Experimental Study on Effects of Burning Behaviours of Materials Caused by External Heat Radiation

A Comparative Experimental Study on Heat Release Rates of Charring and Noncharring Solid Combustible Materials

Experimental Analysis on Heat Release Rate of Materials

Research of combustion characteristic of car external decoration materials

Experimental of Thermal Degradation and Ignition of Wood by Thermal Radiation

Experimental Study on Charring of Wood under Simulated Fire

An Experimental and Numerical Study on Fire Behaviors of Charring Materials Frequently Used in Buildings

Experimental study on combustion phenomena of external wall thermal insulation material in the fire

Study on the Effects of Heat Flux Levels on Heat Release Rate of Wood

Experimental study on fire behaviors of external thermal insulation composite system under vertical radiation

Experimental Study on Releasing Characterization of Smoke from Burning of Several Typical Woods

Experimental Investigation of Flame Spread on Horizontal Combustible Surface With External Radiation

Characterization of Burning Behaviors of Plant Foliages under External Radiant Heat Flux

Fire Spread over Charring Materials: Influence of the Sample Orientation and External Radiant Intensity

Experimental Study on the Radiative Ignition of Combustible Materials

The Influence of Different External Heating Ways on Pyrolysis and Spontaneous Ignition of Some Woods

Comparative Study of Fire Characteristics of Aged and Unaged Pinewood

Melting Flow Burning Fire Performance of Thermoplastic Materials

The Pyrolysis and Ignition of Charring Materials under an External Heat Flux

Experimental Study on Burning Behaviors of Photovoltaic Panels with Different Coverings Using a Cone Calorimeter

HEAT RELEASE RATE OF TYPICAL COMBUSTIBLE IN THE CONFINE