Abstract:Densified wood (DW) is a recently developed material with excellent mechanical properties, considered as an ideal construction material for high-rise timber buildings. However, its flame spread behavior has not been well understood limiting its applications. This work for the first time experimentally and analytically investigates the horizontal flame spread behavior of DW. The influences of material structural characteristics (e.g. density) on heat transfer characteristics are focused. Thermally thin DW with density ranges of 441–1025 kg/m 3 and a constant thickness of 2 mm were tested. The flame spread rate, mass loss rate (MLR) and flame height decreased with the increased wood density. A power-law correlation between the dimensionless MLR and dimensionless density is proposed, which well predicts the experiments with an R 2 of 0.922. The increased wood density decreases flame height and reduces flame radiation. The gas-phase heat transfer shifts from radiation-dominant to convection-dominant. The longitudinal and radial thermal conductivities of DW increased with wood density. Empirical equations are optimized to predict the thermal conductivities of DW with R 2 of 0.870 (longitudinal) and 0.837 (radial). The preheating zone length and the temperature gradient per unit length don't vary significantly with wood density. Their values are averaged to 25.62 mm and 9.312 K/mm respectively. The longitudinal heat conduction is increased with the wood density due to the increased conductivity. However, this conduction increase is lower than the radiation decrease as the wood density increases. Thus, the total heat flux is slightly decreased with the wood density. The gas phase heat transfer dominates the flame spread. However, the longitudinal heat conduction can account for more than half of the gaseous heat transfer, and thus cannot be negligible. Results of this work improve the understanding of DW flame spread, which helps to evaluate the fire behaviors of timber construction.

Study on the Effects of Heat Flux Levels on Heat Release Rate of Wood

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

The Pyrolysis and Heat Release Rate of Wood Exposed to Weak External Heat Flux for Long Times

The Influence of Different External Heating Ways on Pyrolysis and Spontaneous Ignition of Some Woods

Influence of temperature and heat flux direction on wood heat transfer performance

Experimental Study on Effects of Burning Behaviours of Materials Caused by External Heat Radiation

HEAT RELEASE RATE OF TYPICAL COMBUSTIBLE IN THE CONFINE

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

EXPERIMENTAL STUDY ON CHARACTERISTICS OF FLAME SPREAD OVER THE SURFACE OF WOOD SHEETS WITH DIFFERENT WIDTH UNDER DIFFERENT INCLINED ANGLE

PREDICTING THE TEMPERATURE DISTRIBUTION OF WOOD EXPOSED TO A VARIABLE HEAT FLUX

A Comparative Experimental Study on Heat Release Rates of Charring and Noncharring Solid Combustible Materials

Experimental Study on Releasing Characterization of Smoke from Burning of Several Typical Woods

Kinetic Study of Thermal Decomposition and Combustion Characteristics of Wood under Thermal Radiation

Comparative Study of Fire Characteristics of Aged and Unaged Pinewood

The Pyrolysis and Ignition of Charring Materials under an External Heat Flux

Experimental of Thermal Degradation and Ignition of Wood by Thermal Radiation

Kinetic Study on the Pyrolysis of Wood

Thermal Responses of Woods Exposed to High Temperatures Considering Apparent Thermo-Physical Properties

Thermal Behavior of Wood Slab under a Truncated-Cone Electrical Heater: Experimental Observation

Experimental evaluation of combustion performance in the three main anatomical sections of poplar wood

Horizontal flame spread behavior of densified wood: Effect of structural characteristics