Abstract:This work investigates experimentally and theoretically the effect of time-dependent incident heat flux (HF), which is more reasonable in fire-like environment, on thermal degradation process of wet pine wood. A feedback method was utilized to generate a time-dependent heat flux by controlling the output power of radiative heater. Both quadratic and linear heat fluxes were studied in this study. Comparison between measured heat fluxes and designed values indicates that the method provides high accuracy. Measurements of temperature distribution at different depths of material, ignition time and mass loss rate were implemented in the tests to examine the effects of time-dependent heat fluxes. Additionally, analytical model and numerical model were developed to predict the pyrolysis behaviors, and good agreement exists between the experimental and simulational results. Results showed that the heat penetration layer is restricted to a thinner depth for HF with higher increasing rate. A linear relationship was found between ignition time and HF parameters, which is also validated by experimental data and reexamined by constant heat flux circumstance. Mass loss rate was affected significantly by the changed heat flux compared with constant scenario. Furthermore, critical mass flux, which keeps almost unchanged, can be employed as ignition criterion due to the fact that the ignition temperature increases with increasing heat flux, which also certifies the conclusions of other researchers.

Influence of temperature and heat flux direction on wood heat transfer performance

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Experimental Measurements of Thermal Conductivity of Wood Species in China: Effects of Density, Temperature, and Moisture Content

Experimental Study of the Anisotropic Thermal Conductivity of Spruce Wood

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

Study on the Effects of Heat Flux Levels on Heat Release Rate of Wood

Study of Heat Conduction Transfer Functions of Fins

Surface Temperature Measurement on Wood Exposed to Time-increasing Heat Fluxes

Effects of Heat Treatment on Some Physical Properties of Douglas Fir (pseudotsuga Menziesii) Wood

The Influence of Different External Heating Ways on Pyrolysis and Spontaneous Ignition of Some Woods

EXPERIMENTAL STUDY ON CHARACTERISTICS OF FLAME SPREAD OVER THE SURFACE OF WOOD SHEETS WITH DIFFERENT WIDTH UNDER DIFFERENT INCLINED ANGLE

PREDICTING THE TEMPERATURE DISTRIBUTION OF WOOD EXPOSED TO A VARIABLE HEAT FLUX

Thermal Responses of Woods Exposed to High Temperatures Considering Apparent Thermo-Physical Properties

Flexural behavior of larch wood under fire condition

Experimental study on the influential factors of thermal parameters of Eucalyptus and Populus cathayana

A Preliminary Study of Wood Conductivity Coefficient Based on Series-parallel Theory

Thermal properties of wood: measurements by transient plane source method in dry and wet conditions

Experimental evaluation of combustion performance in the three main anatomical sections of poplar wood

Kinetic Study of Thermal Decomposition and Combustion Characteristics of Wood under Thermal Radiation

Pyrolysis and Spontaneous Ignition of Wood under Time-Dependent Heat Flux