Abstract:Insulation products made of expanded polystyrene (EPS) are commonly utilized in buildings. However, Norwegian building regulations restrict the use of such combustible insulation due to an increased risk of fire spread and generation of smoke and toxic gases. Installation of fire protection coverings has been adopted as a mitigation strategy to address these safety risks. Notably, the current regulations lack pre-approved solutions describing what is considered an adequate protection of combustible insulation. The present study investigated the fire protection properties of selected coverings used to protect EPS insulation in inner walls. Eight comparative fire tests were conducted using an indicative fire resistance test furnace. The test specimens consisted of EPS blocks mounted on a wooden frame and covered with one or two layers of selected board coverings. The specimens were positioned vertically within the test furnace, and each fire test lasted for 10 or 15 min. Test results revealed that only two configurations consisting of either two layers of 12.5 mm gypsum boards or a combination of 12 mm oriented strand board (OSB) and 12.5 mm gypsum board showed no evidence of damage to the EPS substrate after a 15-min fire exposure. Consequently, the findings suggest that a total covering thickness of at least 24.5 mm, comprising two layers of boards, is necessary to prevent adverse effects on EPS insulation. Furthermore, fire tests conducted on coverings with introduced damages and defects showed that the affected area around the damages and defects were limited. For the standard EPS substrate, this area extended from 28 mm to 90 mm, while for the fire-retardant EPS substrate from 28 mm to 75 mm after a 10-min fire exposure. These results suggest that minor physical failures in the covering have limited impact on the fire safety of the system.

Influence of Fire Partitions on Reaction-to-Fire Properties and Fire Spread Properties of Metal-Skinned Expandable Polystyrene Sandwich Panel

Effect of Width on the Fire Spreading Characteristics of PE Metal Sandwich Panels under the Action of Double Fire Sources

Fire safety evaluation of expanded polystyrene foam by multi-scale methods

Impact of core thickness and opening height on the combustion characteristics of polyethylene sandwich panels

Improving the fire performance and smoke suppression of expandable polystyrene foams by coating with multi‐dimensional carbon nanoparticles

Fire Spread Characteristics of Metal-Polyethylene Sandwich Panels

Small-scale experimental study on EPS ETICS and flame-retardant coating reaction-to-fire performance

Optimizing the Composition Design of Cement-Based Expanded-Polystyrene (EPS) Exterior Wall Based on Thermal Insulation and Flame Retardance

Experimental study on mechanical and thermal insulation properties of a geopolymer‐based fireproof sandwich panel

Effect of Spacing on the Flame Propagation Characteristics of PE/Metal Sandwich Insulation Panels

Experimental Investigation of the Post-Fire Impact Resistance and Energy-Absorbing Characteristics of Polyethylene Cored Lightweight Metal Sandwich Panels

Fire Performance of EPS ETICS Facade: Effect of Test Scale and Masonry Cover

Novel preparation method and fire performance study of EPS composites based on calcium sulphate hemihydrate

Impact of Sliding Window Opening Sizes and Crosswinds on Combustion Characteristics of Polyethylene Sandwich Panels in External Venting Façade Fires

A facile and efficient flame-retardant and smoke-suppressant resin coating for expanded polystyrene foams

Flame Spread over the Surface of Thermal Insulation Materials in Different Environments

Combustion characteristics and fire hazard of polystyrene exterior wall thermal insulation materials

Research on Thermal and Central Flame Spread Behaviors over Insulation Material EPS in Different Concave Structure Cases

Thickness Effect on Flame Spread Characteristics of Expanded Polystyrene in Different Environments

Experimental study of fire exposed expanded polystyrene (EPS) insulation protected by selected coverings

Thermal and Fire Risk Analysis of Low Pressure on Building Energy Conservation Material Flexible Polyurethane with Various Inclined Facade Constructions