Abstract:Polystyrene (PS) is a widely used building insulation material with good mechanical strength and strong temperature adaptability. However, PS itself is highly flammable and displays poor flame retardancy. At present, building fires caused by organic external wall thermal insulation materials prepared from PS represent a new fire hazard. In this study, the addition of an intumescent flame retardant (IFR) to reduce the flammability of PS was achieved. Using melamine (MEL), acrylonitrile-styrene-acrylate (ASA), and phytic acid (PA) as raw materials, a new type of flame retardant (MAP) was prepared by an electrostatic self-assembly method and was introduced to modify PS. Its effect on the flammability of PS composites was also investigated. The flammability of the PS composites was characterized using the limiting oxygen index (LOI) and vertical combustion. The effect of MAP on the morphology of the carbon layer formed from polymer decomposition was studied using scanning electron microscopy (SEM). By adding MAP to a PS/20%N-IFR flame-retardant composite, the flame-retardant property was significantly improved, the limiting oxygen index reached 37, and the vertical combustion reached a V-0 level. The fire performance index (FPI) of the PS/20%N-IFR composite reached 0.0054, which was significantly higher than that of the control PS (0.037) as determined by the cone calorimetry test. The SEM results showed that the introduction of MAP can increase the density of the carbon layer after combustion. The heat release rate for combustion was reduced. In addition, the mechanical properties of the PS/20%N-IFR composites were compared with those with no flame retardant. The tensile strength of the PS/20%N-IFR composite was 26.1 MPa and the elongation of the PS/20%N-IFR composite remained at 2.2%. The PS/20%N-IFR composite displayed better flame retardancy than the untreated material and good mechanical properties. The presence of MAP prevented the heat and oxygen transfer and interrupted the releasing of flammable products, thus protecting the PS from burning. This flame-retardant material may find broad applications in building insulation materials.

Combustion characteristics and fire hazard of polystyrene exterior wall thermal insulation materials

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Thermogravimetric analysis and pyrolysis characterization of expanded–polystyrene and polyurethane–foam insulation materials

Pyrolysis and combustion characteristics of typical waste thermal insulation materials

Fire safety evaluation of expanded polystyrene foam by multi-scale methods

Optimizing the Composition Design of Cement-Based Expanded-Polystyrene (EPS) Exterior Wall Based on Thermal Insulation and Flame Retardance

Experimental Study on the Surface Pyrolysis Properties and Modeling of Expanded Polystyrene

Small-scale experimental study on EPS ETICS and flame-retardant coating reaction-to-fire performance

Correlation analysis of sample thickness, heat flux, and cone calorimetry test data of polystyrene foam

Preparation of a New Type of Expansion Flame Retardant and Application in Polystyrene

Experimental study of fire exposed expanded polystyrene (EPS) insulation protected by selected coverings

Influence of Fire Partitions on Reaction-to-Fire Properties and Fire Spread Properties of Metal-Skinned Expandable Polystyrene Sandwich Panel

A facile and efficient flame-retardant and smoke-suppressant resin coating for expanded polystyrene foams

Preparation and Sound Insulation Performance of Polystyrene Building Flame Retardant and Thermal Insulation Building Materials

Flame Spread Characteristics of Inclined Extruded Polystyrene Thermal Insulation Material

Synergistic Fire Hazard Effect of a Multifunctional Flame Retardant in Building Insulation Expandable Polystyrene through a Simple Surface-Coating Method

Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template

Research on the Influence of Environmental Pressure on the Combustion Characteristics and Fire Spread of Building External Wall Insulation Materials

Fire Performance of EPS ETICS Facade: Effect of Test Scale and Masonry Cover

Synthesis of a novel triazine-based intumescent flame retardant and its effects on the fire performance of expanded polystyrene foams

A novel halogen-free flame-retardant fabrication for the study of smoke suppression and flame retardancy of polystyrene