Abstract:An experimental study on the characteristics of downward flame spread of extruded polystyrene (XPS) is presented. The parameters investigated include average mass loss rate per unit of thickness (\( \dot{m}^{'} \)), average flame height (H f), average flame spread rate (v f), and mass growth rate (\( \dot{m}_{1} \)) of molten XPS. The effects of sample thickness (d), sidewalls and atmospheric pressure (p), and the combined effects of these factors on the flame spread are studied. The larger sample thickness corresponds to larger \( \dot{m}^{'} \) and higher flame upon most occasions. As d rises, v f and \( \dot{m}_{1} \) increase under all conditions; v f and d follow the equation: \( {\text{v}}_{\text f} = A ( 1- {\text{exp(}} - {\text{Cd))}} \). The dimensionless heat release rate: \( \dot{Q}^{*} \propto { \exp }( - 0. 3d) \). \( \dot{m}^{'} \), v f , and \( \dot{m}_{1} \) obtained without sidewalls are higher than those with sidewalls. \( \dot{m}^{'} \), v f, and H f obtained on the plain (p = 100.8 kPa) are larger than those obtained on the plateau (p = 65.5 kPa). \( \dot{m}_{1} \) obtained on the plain is lower than that on the plateau. In most cases without sidewalls, \( \dot{m} \propto p^{{\text n_{0}} } \), where 1.9 < n 0 < 2, and \( H_{\text f} = a + \mu p^{{\text n_{0} }} \). H f obtained in the cases without sidewalls is larger than that with sidewalls when the sample thickness is small, while the opposite is true for thicker samples. When sidewalls are absent, on the plain, with a rise in thickness, the increase of v f is significant for thin samples while the variation is not considerable for thick samples; on the plateau, this increase is significant for all thicknesses tested. The experimental results agree well with the theoretical analysis.

Flame Spread Characteristics of Inclined Extruded Polystyrene Thermal Insulation Material

Experimental Study of Altitude and Orientation Effects on Heat Transfer over Polystyrene Insulation Material

Effects of Width and Inclined Angel of PS Plate on Its Combustion Flame Structure and Spreading

Experimental Study on Upward Flame Spread of Exterior Wall Thermal Insulation Materials

Thermal and fire risk analysis of typical insulation material in a high elevation area: Influence of sidewalls, dimension and pressure

Experimental study on the characteristics of horizontal flame spread over XPS surface on plateau.

Theoretical and experimental study of width effects on horizontal flame spread over extruded and expanded polystyrene foam surfaces

Research on Thermal and Central Flame Spread Behaviors over Insulation Material EPS in Different Concave Structure Cases

Flame Spread over the Surface of Thermal Insulation Materials in Different Environments

Downward Flame Spread over Extruded Polystyrene

Effects of sample width and inclined angle on flame spread across expanded polystyrene surface in plateau and plain environments

Effects of altitude and sample orientation on heat transfer for flame spread over polystyrene foams

Effects of altitude and inclination on the flame structure over the insulation material PS based on heat and mass transfer

Effect of Incline Angle on Surface Flame Spread of Polypropylene

Experimental Study on Flame Spread over Inclined PMMA and PE Slabs

Heat Transfer Mechanism of Concurrent Flame Spread over Rigid Polyurethane Foam: Effect of Ambient Pressure and Inclined Angle

Width Effect to the Flame Spread Characteristics of the Insulation Material PS in Plateau and Plain Environments

Effects of Sample Width and Sidewalls on Downward Flame Spread over XPS Slabs

Effect of width on pyrolysis angle during flame spread over horizontal extruded polystyrene (XPS) surface

Thickness Effect on Flame Spread Characteristics of Expanded Polystyrene in Different Environments

Experimental Investigation of Downward Discrete Flame Spread of the Thermoplastic Material in Exterior Insulation Walls: Melt-Flowing and -Dripping