Abstract:Polystyrene (PS) is a widely used building insulation material with good mechanical strength and strong temperature adaptability. However, PS itself is highly flammable and displays poor flame retardancy. At present, building fires caused by organic external wall thermal insulation materials prepared from PS represent a new fire hazard. In this study, the addition of an intumescent flame retardant (IFR) to reduce the flammability of PS was achieved. Using melamine (MEL), acrylonitrile-styrene-acrylate (ASA), and phytic acid (PA) as raw materials, a new type of flame retardant (MAP) was prepared by an electrostatic self-assembly method and was introduced to modify PS. Its effect on the flammability of PS composites was also investigated. The flammability of the PS composites was characterized using the limiting oxygen index (LOI) and vertical combustion. The effect of MAP on the morphology of the carbon layer formed from polymer decomposition was studied using scanning electron microscopy (SEM). By adding MAP to a PS/20%N-IFR flame-retardant composite, the flame-retardant property was significantly improved, the limiting oxygen index reached 37, and the vertical combustion reached a V-0 level. The fire performance index (FPI) of the PS/20%N-IFR composite reached 0.0054, which was significantly higher than that of the control PS (0.037) as determined by the cone calorimetry test. The SEM results showed that the introduction of MAP can increase the density of the carbon layer after combustion. The heat release rate for combustion was reduced. In addition, the mechanical properties of the PS/20%N-IFR composites were compared with those with no flame retardant. The tensile strength of the PS/20%N-IFR composite was 26.1 MPa and the elongation of the PS/20%N-IFR composite remained at 2.2%. The PS/20%N-IFR composite displayed better flame retardancy than the untreated material and good mechanical properties. The presence of MAP prevented the heat and oxygen transfer and interrupted the releasing of flammable products, thus protecting the PS from burning. This flame-retardant material may find broad applications in building insulation materials.

Novel preparation method and fire performance study of EPS composites based on calcium sulphate hemihydrate

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

A facile and efficient flame-retardant and smoke-suppressant resin coating for expanded polystyrene foams

Optimizing the Composition Design of Cement-Based Expanded-Polystyrene (EPS) Exterior Wall Based on Thermal Insulation and Flame Retardance

Improving the fire performance and smoke suppression of expandable polystyrene foams by coating with multi‐dimensional carbon nanoparticles

Synthesis of bio-based toughening phosphorus-nitrogen flame retardant and study on high toughness EPS flame retardant insulation sheet

Synthesis of a novel triazine-based intumescent flame retardant and its effects on the fire performance of expanded polystyrene foams

Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template

Small-scale experimental study on EPS ETICS and flame-retardant coating reaction-to-fire performance

Understanding the Influence of Gypsum upon a Hybrid Flame Retardant Coating on Expanded Polystyrene Beads

Preparation of a New Type of Expansion Flame Retardant and Application in Polystyrene

Preparation of Microencapsulated Nitrogen‑phosphorus‑silicon Flame Retardant and Its Effect on High Impact Polystyrene Flame Retardancy

Flame Retarded Rigid Polyurethane Foams Composites Modified by Aluminum Diethylphosphinate and Expanded Graphite

Environmental Friendly Intumescent Flame Retardant Gives Epoxy Resin Excellent Fire Resistance and Mechanical Properties

A novel halogen-free flame-retardant fabrication for the study of smoke suppression and flame retardancy of polystyrene

Effects of Melamine Cyanurate and Aluminum Hypophosphite on the Flame Retardancy of High-Impact Polystyrene

Expanded Polystyrene Beads Coated with Intumescent Flame Retardant Material to Achieve Fire Safety Standards

Eco-Friendly Preparation of Advanced Epoxy Composites and Their Pyrolysis and Flame Retardant Mechanisms

Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam

A green flame retardant coating based on one-step aqueous complexation of phytic acid and urea for fabrication of lightweight and high toughness flame retardant EPS insulation board

Aluminum Hypophosphite in Combination with Expandable Graphite As A Novel Flame Retardant System for Rigid Polyurethane Foams