Abstract:Nanocomposite buffer layer based on metal oxide and polymer is merging as a novel buffer layer for organic solar cells, which combines the high charge carrier mobility of metal oxide and good film formation properties of polymer. In this work, a nanocomposite of zinc oxide and a commercialized available polyethylenimine (PEI) was developed and used as the cathode buffer layer (CBL) for the inverted organic solar cells and p-i-n heterojunction perovskite solar cells. The cooperation of PEI in nano ZnO offers a good film forming ability of the composite material, which is an advantage in device fabrication. In addition, power conversion efficiency (PCE) of the ZnO:PEI CBL based device was also improved when compared to that of ZnO-only and PEI-only devices. The highest PCE of P3HT:PC61BM and PTB7-Th:PC61BM devices reached to 3.57% and 8.16%, respectively. More importantly, there is no obvious device performance loss with the increase of the layer thickness of ZnO:PEI CBL to 60 nm in organic solar cells, which is in contrast to the PEI based devices, whose device performance decreases dramatically when the PEI layer thickness is higher than 6 nm. Such a nano composite material is also applicable in inverted heterojunction perovskite solar cells. A PCE of 11.76% was achieved for the perovskite solar cell with a thick ZnO:PEI CBL (150 nm) CBL, which is around 1.71% higher than that of the reference cell without CBL, or with ZnO CBL. In addition, stability of the organic and perovskite solar cells having ZnO:PEI CBL was also found to be improved in comparison with that of PEI based device. (C) 2016 Elsevier B.V. All rights reserved.

Annealing-Free ZnO:PEI Composite Cathode Interfacial Layer for Efficient Organic Solar Cells

Decreased Charge Transport Barrier and Recombination of Organic Solar Cells by Constructing Interfacial Nanojunction with Annealing-Free ZnO and Al Layers

A Solution-Processed Binary Cathode Interfacial Layer Facilitates Electron Extraction for Inverted Polymer Solar Cells

Correlating Annealing Temperature of ZnO Nanoparticle Electron Transport Layer with Performance of Inverted Polymer Solar Cells

Preparation of Reduced Graphene Oxide:ZnO Hybrid Cathode Interlayer Using in Situ Thermal Reduction/Annealing for Interconnecting Nanostructure and Its Effect on Organic Solar Cell.

A Low-Cost and Low-Temperature Processable Zinc Oxide-Polyethylenimine (zno:Pei) Nano-Composite As Cathode Buffer Layer for Organic and Perovskite Solar Cells

An Inorganic Molecule-Induced Electron Transfer Complex for Highly Efficient Organic Solar Cells

Improved Device Performance of Polymer Solar Cells by Using a Thin Light-harvesting-Complex Modified ZnO Film as the Cathode Interlayer

Delicate Energy-Level Adjustment and Interfacial Defect Passivation of ZnO Electron Transport Layers in Organic Solar Cells by Constructing ZnO/In Nanojunctions

Facilitating Electron Extraction of Inverted Polymer Solar Cells by Using Organic/inorganic/organic Composite Buffer Layer

High performance ZnO cathode interface doped by organic electrolyte and inorganic metal ion for organic solar cells

PEIE Doped ZnO As a Tunable Cathode Interlayer for Efficient Polymer Solar Cells

Efficient Organic-Inorganic Hybrid Cathode Interfacial Layer Enabled by Polymeric Dopant and Its Application in Large-Area Polymer Solar Cells

Overcoming Defect-Induced Charge Recombination Loss in Organic Solar Cells by Förster Resonance Energy Transfer

Employing Inorganic/Organic Hybrid Interface Layer to Improve Electron Transfer for Inverted Polymer Solar Cells

Alkali Metal Salts Doped ZnO Interfacial Layers Facilitate Charge Transport for Organic Solar Cells

Solution processed nano-ZnMgO interfacial layer for highly efficient inverted perovskite solar cells

Chapter 8 Interface Engineering and Electrode Engineering for Organic Solar Cells

Increased Electron Transport and Hole Blocking in an Aqueous Solution Processed Dye-Doped ZnO Cathode Interlayer for High Performance Organic Solar Cells

Solution-processed SnO(2 )nanoparticle Interfacial Layers for Efficient Electron Transport in ZnO-based Polymer Solar Cells

Novel Small-Molecule Zwitterionic Electrolyte with Ultralow Work Function As Cathode Modifier for Inverted Polymer Solar Cells