Abstract:The productivity, surface finish, and dimensional accuracy during machining are directly related to the vibration characteristics of tool tip. Moreover, the dynamics of tool tip is not only determined by the flexibility of tool, collet, holder and spindle, but also depends on the contact characteristics of joint interfaces. This paper proposes a fully analytical model of the spindle-holder-tool system considering the nonlinear contact characteristics of joint interfaces. The dynamics of spindle, holder, collet and tool are modeled applying Timoshenko beam theory considering the combined shear and rotational effects, in which the tapered sections of spindle, holder and collet are modeled using multi-stepped beam to account for the taper effect. Under highly dynamic cutting load, the variation in the spacing of joint interfaces will induce the changes in the contact characteristics due to the corresponding vibrations. Therefore, the contact behaviors of spindle/holder, collet/holder, collet/nut, and tool/collet interfaces are analytically modeled using the distributed nonlinear spring-damping layers. The fractal theory and the slicing method are applied to derive the vibration displacement-dependent stiffness matrix of nonlinear springs in joint interfaces considering the surface morphology, geometry, material properties, and locking force of joint interfaces. Furthermore, the five degree of freedom (DOF) nonlinear stiffness model of the spindle-bearing joint dependent on vibration displacement is also considered. The effectiveness of the established analytical dynamic model is verified through vibration testing and modal hammering experiments. The changes in the vibration characteristics by considering the connection ways of joint interfaces, the fractal parameters of joint interfaces and the rotation speed are also investigated. The developed model can provide some theoretical principles for the optimization at design stage without prototypes.

Dynamic Modelling and Vibration Simulation of Air Bearing Spindle Systems Due to Unbalance

Dynamic modeling and vibration response analysis of high speed motorized spindle

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Theoretical prediction and experimental verification of the unbalanced magnetic force in air bearing motor spindles

Active Control for Unbalanced Vibration Control of Electric Spindle-Tool System

A High Accuracy Method for the Field Dynamic Balancing of Rigid Spindles in the Ultra-Precision Turning Machine

A Quasi-Dynamic Model for High-Speed Ball Spinning

A Physics-based Model-data-driven Method for Spindle Health Diagnosis, Part II: Dynamic Simulation and Validation

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Dynamic analysis of the column-spindle system considering the nonlinear characteristics of kinematic joints

Multi-Physics Fields Based Nonlinear Dynamic Behavior Analysis of Air Bearing Motorized Spindle

Dynamic modeling and nonlinear vibration analysis of spindle system during ball end milling process

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

Dynamics Prediction of Spindle System Using Joint Models of Spindle Tool Holder and Bearings

Relationship between dynamic characteristics of air film of aerostatic spindle and mid-frequency of surface topography

Dynamic characteristics of spindle-bearing with tilted pedestal and clearance fit

Modeling and dynamic response of variable mass system of maglev turning electric spindle

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Thermal-mechanical dynamic interaction in high-speed motorized spindle considering nonlinear vibration