Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

Numerical and Experimental Study of the Performance Effects of Varying Vaneless Space in High-Speed Micro Turbine Stators

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Using an Optimisation Strategy to Design a Supercritical CO2 Radial Inflow Turbine Transonic Stator

Performance Test of Radial-inward Turbine in Microturbine

Numerical Investigation on Effects of Leakage Flow on the Aerodynamic Performance of Turbine Stages

Experimental Research on Aerodynamic Performance of Variable Geometry Low Pressure Turbine

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Experimental And Numerical Investigation On Overall Performance Of A Radial Inflow Turbine For 100kw Microturbine

Experimental and Numerical Investigation on Flow Characteristics of a Vaneless Counter-Rotating Turbine at Off-Design Conditions

Comparative Experimental Investigation On Aerodynamic Performance Of A Steam Turbine Cascades, Part Ii - Stator Vanes

A Numerical Investigation of Stator Clocking on High Pressure Turbine's Performance

Numerical Investigations on the Aerodynamic Performance of Turbine Stage with Nonaxisymmetric End Wall Profiling

Design and Numerical Simulation on Coupled Flow Field of Radial Turbine with Air-Inlet Volute

Aerodynamic performance measurement of a novel variable geometry turbine adjustable guide vane scheme by experimental study

Three-dimensional Numerical Investigation of Vaneless Counter-Rotating Turbine

Effects of Stator Blade Camber and Surface Viscosity on Unsteady Flow in Axial Turbine

Research of the performance of a vaneless counter-rotating turbine on the off-design conditions

Numerical Investigations on the Aerodynamic Performance of Turbine Stage and Rotordynamic Characteristics of Stator Seal with Consideration of Supplementary Steam

Numerical Investigation of Secondary Flows Through Highly Loaded Transonic Turbine Stage

Experimental Study on the Aerodynamic Performance of Variable Geometry Low-Pressure Turbine Adjustable Guide Vanes

Overall Performance and Loss Analysis of a Low-Speed Research Compressor with Different Nonaxisymmetric Tip Clearance Layouts