Abstract:This paper describes the redesign of a high pressure rotor (with exit Mach number around 1.5) for the vaneless counter-rotating turbine by choosing adequate exit-to-throat width ratio. Based on the previous design analysis and test results, effects of the exit-to-throat width ratio on the performance of the transonic turbine cascade were proposed. In order to investigate the influence of the exit-to-throat width ratio on the performance of the turbine cascade, a flow model of the convergent-divergent turbine cascade was constructed by using the theory of Laval nozzle. Then a method on how to choose the adequate exit-to-throat width ratio for the turbine cascade was proposed. To validate the method, it was used to calculate the adequate exit-to-throat width ratio for the high pressure rotor of the vaneless counter-rotating turbine. The high pressure turbine rotor was redesigned with the new exit-to-throat width ratio. Numerical simulation results show that the isentropic efficiency of the redesigned vaneless counter-rotating turbine under the design condition has increased by 0.9% and the efficiencies under the off-design conditions are also improved significantly. On the original design, a group of compressional waves are created from the suction surface after about 60% axial chord in the high pressure turbine rotor. While on the new design the compressional waves are eliminated. Furthermore, on the original design, the inner-extending waves first impinge on the next high pressure turbine rotor suction surface. Its reflection is strong enough and cannot be neglected. However on the new design the inner-extending waves are weakened or even eliminated. Another main progress is that the redesigned high pressure turbine rotor is of practical significance. In the original rotor, a part of the blade (from 60% axial chord to the trailing edge) is thin leading to the intensity problem and difficult arrangement of the cooling system. In the new design, however, the thickness distribution of the rotor airfoil along the chord is relatively reasonable. The intensity of the rotor is enhanced. It is possible to arrange the cooling system reasonably.

Three-dimensional Numerical Investigation of Vaneless Counter-Rotating Turbine

Research of the performance of a vaneless counter-rotating turbine on the off-design conditions

EFFECT OF DIVERGENT RATIO ON PERFORMANCE OF VANELESS COUNTER-ROTATING TURBINE HIGH PRESSURE ROTOR

Application Of A 3d Blade Design Method For Supersonic Vaneless Contra-Rotating Turbine

Experimental and Numerical Investigation on Flow Characteristics of a Vaneless Counter-Rotating Turbine at Off-Design Conditions

Straightening rotor blades design of supersonic vaneless contra-rotating turbine

Unsteady Numerical Simulation Of Shock Systems In Vaneless Counter-Rotating Turbine

Basic analysis Of a counter-rotating turbine

Influence of exit-to-throat width ratio on performance of high pressure convergent-divergent rotor in a vaneless counter-rotating turbine

Aerodynamic Design of Three-Stage Vaneless Counter-Rotating Turbine

BASIC ANALYSIS ON 1+3/2 AND 1+1/2 COUNTER-ROTATING TURBINES

Design and Analysis of LP-vaneless Contra-Rotating Turbine

AN INVESTIGATION ON AERODYNAMIC PERFORMANCE OF A VANELESS COUNTER-ROTATING TURBINE WITH RECESSED HIGH-PRESSURE ROTOR TIPS

Numerical simulation of unsteady flow in a vaneless counter-rotating turbine

Flow Structures and Heat Transfer Characteristics in a Vaneless Counter-Rotating Turbine Cavity with Different Cooling Inflows

Analysis Of Technical Challenges In Vaneless Counter-Rotating Turbomachinery

Modeling and Performance Analysis of a Dual-Shaft Counter-Rotating Gas Turbine

Design of A Counter-rotating Wind Turbine and Validation with 3-D Numerical Simulation

Design and Numerical Simulation on Coupled Flow Field of Radial Turbine with Air-Inlet Volute

Design and Analysis of Low Pressure Turbine of Vaneless Counter-rotating Turbine with Highly-loaded High Pressure Stage

Experimental Research about Shock Wave in a 1+1/2 Counter-Rotating Turbine