Abstract:For axial turbines, tip leakage vortex and passage vortex flow are responsible for a large part of the aerodynamic loss. To pursue higher turbine efficiency, many methods are undertaken to eliminate the tip leakage loss. In this work, by experimental and numerical methods, novel wave-shaped tip-shroud contours on the unshrouded turbine cascade were proposed. In a low-speed large-scale linear turbine cascade facility, a traditional flat tip was first conducted to comprehensively validate the numerical tool, especially the inlet conditions and the total pressure loss due to the tip leakage loss. The numerical settings were kept the same as the experimental facility. It achieved a satisfactory agreement between the CFD and experiments. It was found that in a flat tip case, a large, integral tip leakage vortex structure was identified and responded to the aerodynamic loss within the tip leakage core. Then a series of novel wave-shaped tip-shroud contours were considered in the current turbine cascade. The overtip flow exited the suction side tip gap, and the peak mass flow rate was concentrated around the troughs of the wave tip. Several small-sized, but stronger-vorticity-magnitude vortex structures were identified. By breaking down a large, integral vortex structure into several smaller-scale vortices, the vortex evolution was beneficial for the turbine efficiency. Although a slight enhancement of passage vortex was identified, the overall loss reduction of 3.0% was achieved by reducing the tip leakage loss, which dominated the loss contribution. According to the real working condition, axial displacement for the blade was considered. Within the current scope, the maximum reduction of tip leakage loss coefficient was reduced by 14.6% compared to the flat tip case. It was mainly contributed by the smaller contraction coefficient within the tip gap, which reduced the overtip leakage mass flow. Meanwhile, the vena contracta within the tip gap was altered, as well as static pressure distribution on the tip surface. As a result, the minimum static pressure was re-distributed at the throat of the tip gap. It was proven that this novel wave-shaped tip-shroud contour was an efficient way to improve the aerodynamic performance at a larger tip gap.(c) 2022 Elsevier Ltd. All rights reserved.

AN INVESTIGATION ON AERODYNAMIC PERFORMANCE OF A VANELESS COUNTER-ROTATING TURBINE WITH RECESSED HIGH-PRESSURE ROTOR TIPS

Three-dimensional Numerical Investigation of Vaneless Counter-Rotating Turbine

EFFECT OF DIVERGENT RATIO ON PERFORMANCE OF VANELESS COUNTER-ROTATING TURBINE HIGH PRESSURE ROTOR

Experimental and numerical investigation of high load turbine blade tip cavity structures

Experimental and Numerical Investigation on Flow Characteristics of a Vaneless Counter-Rotating Turbine at Off-Design Conditions

Unsteady Aerodynamics Of A Flat Tip And A Winglet Tip In A High-Pressure Turbine

Research of the performance of a vaneless counter-rotating turbine on the off-design conditions

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Experimental and numerical investigations for turbine aerodynamic performance with different pressure side squealers and incidence angles

Novel Wave-Shaped Tip-Shroud Contours Towards Reducing Turbine Leakage Loss

Numerical Investigation on Effects of Leakage Flow on the Aerodynamic Performance of Turbine Stages

EFFECTS OF THE TIP LEAKAGE FLOWS OF THE SHROUDED ROTOR BLADE ON THE AERODYNAMIC PERFORMANCE OF THE TURBINE STAGE

Influence of exit-to-throat width ratio on performance of high pressure convergent-divergent rotor in a vaneless counter-rotating turbine

Influence of Tip Clearance Size on Flow Characteristics of a Vaneless Counter-Rotating Turbine

Unsteady Winglet-Cavity Tip on Leakage Flow in a High-Pressure Turbine Stage of Low-Aspect Ratio

Aerodynamic Effects of an Incoming Vortex on Turbines with Different Tip Geometries

Numerical Investigation of Blade Tip Winglet on Flow Structure in a High Loading Transonic Rotor

Numerical study of flow in low-pressure turbines with undulated suction surface

Effect Of Relative Movement Between The Shroud And Blade On Tip Leakage Flow Characteristics

A Novel Suction Side Winglet Design Method For High Pressure Turbine Rotor Tips

Effects of Tip Leakage Flow on Aerodynamic Performance of a Low-Reaction Transonic Rotor