Abstract:An aerodynamic optimization design process of multistage axial turbine is presented in this article: first, applying quasi-three dimensional (Q3D) design methods to conduct preliminary design and then adopting modern optimization design methods to implement multistage local optimization. Quasi-three dimensional (Q3D) design methods, which mainly refer to S2 flow surface direct problem calculation, adopt the S2 flow surface direct problem calculation program of Harbin Institute of Technology. Multistage local optimization adopts the software of Numeca/Design3D, which jointly adopts genetic algorithm and artificial neural network. The major principle of the methodology is that the successive design evaluation is performed by using an artificial neural network instead of a flow solver and the genetic algorithms may be used in an efficient way. Flow computation applies three-dimensional viscosity Navier?Stokes (N-S) equation solver. Such optimization process has three features: (ⅰ) local optimization based on aerodynamic performance of every cascade; (ⅱ) several times of optimizations being performed to every cascade; and (ⅲ) alternate use of coarse grid and fine grid. Such process was applied to optimize a three-stage axial turbine. During the optimization, blade shape and meridional channel were respectively optimized. Through optimization, the total efficiency increased 1.3% and total power increased 2.4% while total flow rate only slightly changed. Therefore, the total performance was improved and the design objective was achieved. The preliminary design makes use of quasi-three dimensional (Q3D) design methods to achieve most reasonable parameter distribution so as to preliminarily enhance total performance. Then total performance will be further improved by adopting multistage local optimization design. Thus the design objective will be successfully achieved without huge expenditure of manpower and calculation time. Therefore, such optimization design process may be efficiently applied to the aerodynamic design optimization of multistage axial turbine.

Application Of A 3d Blade Design Method For Supersonic Vaneless Contra-Rotating Turbine

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

A design method of volute profile of multi-blade centrifugal fan based on DRBF model

Blade Design with Three-Dimensional Viscous Analysis and Hybrid Optimization Approach

Aerodynamic 3-Dimensional Optimal Design by NURBS of a Certain Stage Turbine Blades

A3-D Numerical Optimization Design Method and Its Application in Axial Fans with Outlet Guide Vanes

Trend of Full Three-dimensional Blading Techniques for High Performance Turbomachinery

A Novel Airfoil Design Method and its Application to the Optimization Design of a 3-Stage Transonic Compressor

Structural design and flow field analysis of the variable nozzle of turbocharger

3D Temperature Evaluation of the Vane Based on Fluid-Network Method

A two-dimensional method for radial turbine volute design - Part 2: Circumferentially non-uniform boundary condition

A novel design method of variable geometry turbine nozzles for high expansion ratios

BASIC ANALYSIS ON 1+3/2 AND 1+1/2 COUNTER-ROTATING TURBINES

Three-Dimensional Aerodynamic Optimization of Turbine Blade Profile Considering Heat Transfer Performance

Full 3-D Inverse Design Optimization Method for Turbomachinery Blade

Diagnosis and Design Improvement of the Internal Flow Field in an Automotive Cooling Fan Based on Boundary Vorticity Dynamics, Part I: Blade Profile Scaling and Rotation

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Three Dimensional Numerical Analysis of Internal Flow Field of Axial Flow Turbine

Study on Aerodynamic Optimization Design Process of Multistage Axial Turbine

Influence of 3D Guide Vanes on the Channel Vortices in the Runner of a Francis Turbine

A STAGE OF TEST TURBINE DESIGN AND ITS FLOW FIELD ANALYSIS