Abstract:Knowledge of the state of plastic deformation in metallic structures is vital to prevent failure. This is why non-destructive acoustic tests based on the measurement of first order elastic constants have been developed and intensively used. However, plastic deformations, which are usually heterogeneous in space, may be invisible to these methods if the variation of the elastic constants is too small. In recent years, digital image correlation techniques, based on measurements carried out at the surface of a sample, have been successfully used in conjunction with finite element modeling to gain information about plastic deformation in the sample interior. Acoustic waves can penetrate deep into a sample and offer the possibility of probing into the bulk of a plastically deformed material. Previously, we have demonstrated that nonlinear acoustic methods are far more sensitive to changes in dislocation density than linear ones. Here, we show that the nonlinear Second Harmonic Generation method (SHG) is sensitive enough to detect different zones of von Mises stress as well as effective plastic strain in centimeter-size aluminium pieces. This is achieved by way of ultrasonic measurements on a sample that has undergone a three-point bending test. Because of the relatively low stress and small deformations, the sample undergoes plastic deformation by dislocation proliferation. Thus, we conclude that the nonlinear parameter measured by SHG is also sensitive to dislocation density. Our experimental results agree with numerical results obtained by Finite Element Method (FEM) modeling. We also support the acoustic results by X-Ray Diffraction measurements (XRD). Although intrusive and less accurate, they also agree with the acoustic measurements and plastic deformations in finite element simulations.

Scanning Non-Collinear Wave Mixing for Nonlinear Ultrasonic Detection and Localization of Plasticity

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Evaluation of the Localized Plasticity Using the Mixing of Counter-Propagating Lamb Waves

Evaluation of Plastic Deformation Considering the Phase-Mismatching Phenomenon of Nonlinear Lamb Wave Mixing

Numerical Investigations on Localization of Material Degradation Using Guided Mixing Wave

Evaluation of Material Surface Properties Using One-Way Collinear Mixing Rayleigh Waves

Experimental study on the nonlinear mixing of ultrasonic waves in concrete using an array technique

Phased array-based nonlinear wave mixing technique: Application to lack-of-fusion porosity characterization in additively manufactured metals

Nonlinear Ultrasonic Detection of Closed Cracks in Metal Plates with Phase-Velocity Mismatching

Assessment of Material Dislocation Damage by Nonlinear Ultrasound

A Numerical Study of Non-Collinear Mixing of Three-Dimensional Nonlinear Waves in an Elastic Half-Space

Nonlinear acoustic characterization of heterogeneous plasticity in bent aluminium samples

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

Application Of An Adaptive Two-Wave Mixing Interferometer For Detection Of Surface Defects

Modeling of Ultrasonic Nonlinearities for Dislocation Evolution in Plastically Deformed Materials: Simulation and Experimental Validation.

Advancing Elastic Wave Imaging Using Thermal Susceptibility of Acoustic Nonlinearity

An iterative method to evaluate one-dimensional pulsed nonlinear elastic wavefields and mixing of elastic waves in solids

Experimental and Numerical Studies of Nonlinear Ultrasonic Responses on Plastic Deformation in Weld Joints

Application of Nonlinear Lamb Wave Mixing Method for Residual Stress Measurement in Metal Plate

Ultrasonic Nonlinear Response of Micro Plastic Damage on Aluminum Alloy Plate with Varying Thickness

Nonlinear Ultrasonic Techniques for Testing Micro-Defects in Metal Matrix Composite Structure