Abstract:Abstract Due to various characteristics such as high thermal efficiency, inherent safety, passive safety, and hydrogen production for industrial use, the high temperature gas-cooled reactor (HTR) is considered as one of the most promising technologies in the future. Fuel elements are the core part of a reactor. In the existing high-temperature gas cooled reactor HTR, spherical fuel elements are involved, with graphite accounting for more than 90% of the mass and volume of the fuel element. However, graphite is prone to oxidation in oxidizing atmospheres at a higher temperature than 400°C. Regarding the design of future HTR, accident conditions must be taken into consideration. Under the accident conditions of inlet and outlet water, the graphite in the spherical fuel element is easy to be oxidized. This causes damage to the fuel elements and increases the release of fission products, which threatens the safety of HTR. In this study, two-step pack cementation is performed to prepare SiC composite coatings on the surface of graphite spheres with a diameter of 40 mm, which improves the oxidation resistance of graphite spheres. According to research, the thickness of coating is about 150 μm after two-step pack cementation, with SiC and Si as the main phase of the coating. However, it is necessary to improve the density of SiC composite coatings needs. After 7 h of oxidation in static air at 1500°C, the mass loss reaches 22.22%. To a certain extent, the compactness of the coating can be improved by the slurry impregnation and Si sol gel method.

Protecting Nuclear Graphite from Liquid Fluoride Salt and Oxidation by SiC Coating Derived from Polycarbosilane

SiC/MoSi2-SiC-Si Oxidation Protective Coatings for HTR Graphite Spheres with Residual Si Optimized

Structure of Sic Coatings from Polycarbosilane on Graphite for Fuel Element Matrix of High Temperature Gas-Cooled Reactor

SiC/SiO2 oxidation-resistant coatings on fuel element matrix graphite of high temperature gas-cooled reactor

Dual layer SiC coating on matrix graphite sphere prepared by pack cementation and fluidized-bed chemical vapor deposition

SiC Coatings Fabricated by Chemical Vapor Reaction on Graphite

The Stability of SiC Coating and SiO2/SiC Multilayer on the Surface of Graphite for HTGRs at Normal Service Condition

Direct characterization of ion implanted nanopore pyrolytic graphite coatings for molten salt nuclear reactors

Novel Pyrolytic Boron Nitride Coating to Reduce Graphite Interactions in Molten Fluoride Salt

Study of Sic/Sio2 Oxidation-Resistant Coatings on Matrix Graphite for Htr Fuel Element

Micro Four‐Layer SiC Coating on Matrix Graphite Spheres of HTR Fuel Elements by Two‐Step Pack Cementation

Influence of SiC Coatings on the Tribological Behaviors of Graphite for High Temperature Gas-Cooled Reactor

Preparation of SiC Composite Coating on the Surface of Graphite Spheres in VHTR

Oxidation resistance improvement of carbon fiber nonwoven fabrics through SiC coating technology

Improving the anti-oxidation and water wettability of graphite through the design of coating structure for the preparation of Al2O3–SiC–C castables

Polycarbosilane as a modulator for reaction-bonded silicon carbide processing of GNPs/Si mixtures

A Multi-Layered SiC Coating to Protect Graphite Spheres from High Temperature Oxidation in Static Air

SiC/SiO2 Coating on Matrix Graphite Spheres of HTR Fuel Element Produced by a Two-Step Pack Cementation/High-Temperature Oxidation Process

Preparation, Performance and Nuclear Applications of Silicon Carbide Materials Prepared by FB-CVD Method

Preparation and Corrosion Resistance of Chromium Carbide Coating on Graphite by Disproportionation Reaction in Molten Salt

Pack cemented silicon carbide interlayer for plasma sprayed yttria over graphite