Abstract:Abstract Due to various characteristics such as high thermal efficiency, inherent safety, passive safety, and hydrogen production for industrial use, the high temperature gas-cooled reactor (HTR) is considered as one of the most promising technologies in the future. Fuel elements are the core part of a reactor. In the existing high-temperature gas cooled reactor HTR, spherical fuel elements are involved, with graphite accounting for more than 90% of the mass and volume of the fuel element. However, graphite is prone to oxidation in oxidizing atmospheres at a higher temperature than 400°C. Regarding the design of future HTR, accident conditions must be taken into consideration. Under the accident conditions of inlet and outlet water, the graphite in the spherical fuel element is easy to be oxidized. This causes damage to the fuel elements and increases the release of fission products, which threatens the safety of HTR. In this study, two-step pack cementation is performed to prepare SiC composite coatings on the surface of graphite spheres with a diameter of 40 mm, which improves the oxidation resistance of graphite spheres. According to research, the thickness of coating is about 150 μm after two-step pack cementation, with SiC and Si as the main phase of the coating. However, it is necessary to improve the density of SiC composite coatings needs. After 7 h of oxidation in static air at 1500°C, the mass loss reaches 22.22%. To a certain extent, the compactness of the coating can be improved by the slurry impregnation and Si sol gel method.

Influence of SiC Coatings on the Tribological Behaviors of Graphite for High Temperature Gas-Cooled Reactor

SiC/SiO2 oxidation-resistant coatings on fuel element matrix graphite of high temperature gas-cooled reactor

SiC Coatings Fabricated by Chemical Vapor Reaction on Graphite

Research on Microstructure and Oxidation Resistant Property of ZrSi2-SiC/SiC Coating on HTR Graphite Spheres

Study of Sic/Sio2 Oxidation-Resistant Coatings on Matrix Graphite for Htr Fuel Element

The Stability of SiC Coating and SiO2/SiC Multilayer on the Surface of Graphite for HTGRs at Normal Service Condition

SiC/MoSi2-SiC-Si Oxidation Protective Coatings for HTR Graphite Spheres with Residual Si Optimized

SiC Coating on HTR Graphite Spheres Prepared by Fluidized-Bed Chemical Vapor Deposition

Tribological Properties Differences of Various Graphite Used in 10 MW High Temperature Gas-cooled Reactor

Effect of silicon/graphite ratio and temperature on oxidation protective properties of SiC/ZrB2–SiC coatings prepared by pack cementation

Stability Analysis of SiO2/SiC Coatings on Matrix Graphite for HTR-10 Fuel Elements

Wear behavior of SiC nanowire-reinforced SiC coating for C/C composites at elevated temperatures

Thermal Stability Analysis of SiC/SiO2 Oxidation Resistant Coatings

SiC/SiO2 Coating on Matrix Graphite Spheres of HTR Fuel Element Produced by a Two-Step Pack Cementation/High-Temperature Oxidation Process

Effect of Laser-Clad NiCrAl-SiC Coatings on Friction-Wear Performance of AISI H13 Steel at High Temperature

Temperature Effect on Ig-11 Graphite Wear Performance

High Temperature Superlubricity Behaviors Achieved by AlSiN Coatings Against WS2 Coatings at 600 °C

Preparation of SiC Composite Coating on the Surface of Graphite Spheres in VHTR

Investigation of High-Speed Rubbing Behavior of GH4169 Superalloy with SiC/SiC Composites

High-temperature Low-Friction Behaviors of Γ-Fe 2 O 3 @sio 2 Nanocomposite Coatings Obtained Through Sol–gel Method

Ablation behavior and mechanism of SiCnw modified SiC-ZrC coating for graphite under a plasma ablation flame