Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

In Situ Observations of Crack Propagation in As-Cast Cu-1.5Fe-0.5Co (wt%) Alloy

Cracking in a Fe–25Mn–3Si–3Al Steel

Microstructure and Compressive Deformation Behavior of As-Cast CrFeCoNiCux High Entropy Alloys

Microstructure and Properties of Cold Drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe Alloys

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

In Situ SEM Investigation of Tensile Fracture Process of Fe-25Cr-35Ni Based Superalloy

In-Situ Straining Observation On Crack Initiation And Growth In An Intermetallic Al67mn8ti25 Alloy

In-situ investigation of damage mechanisms in duplex AlCoCrFeNi2.1 high entropy alloy

In-situ Observation of Ni-Co Based Wrought Superalloy High-Temperature Deformation: Lattice Rotation and Grain Boundary Response

Evolution of Microstructure and Deformation Mechanisms in a Metastable Fe42Mn28Co10Cr15Si5 High Entropy Alloy: A Combined In-Situ Synchrotron X-ray Diffraction and EBSD Analysis

In-situ investigation of microstructure-dependent deformation behavior of an electron-beam welded Ni Co based superalloy

Evolution of the Second-Phase Particles and Their Effect on Tensile Fracture Behavior of 2219 Al-xCu Alloys

In-situ observation of microcrack evolution in a dual-phase steel during tensile straining

A Study of Crack Initiation in a Low Alloy Steel

Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation

Microstructure and tensile properties of Al0.5CoCrcuFeNi high-entropy alloy

Microstructure and Strengthening Model of Cu–Fe In-Situ Composites

Crack growth and fracture mechanics of CuCrFeNiCo high-entropy alloy during tension testing

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests