Abstract:For improving the wear resistance of Al-30Si-5Cu coating, in this study, the composite coating in-situ synthesized TiC-TiN-TiN 0.8 C 0.2 /Al-30Si-5Cu (TiCN/Al-30Si-5Cu) was prepared used TiH 2 -graphite aggregates as raw materials and plasma spraying technology. The effect of in-situ synthesized ceramic reinforcements on the coating was researched in detail. The results showed that during the plasma spraying process, TiH 2 decomposed and chemically reacted with graphite to form TiC. Additionally, some Ti also reacted with N 2 and O 2 in the air to form TiN and TiO 2 . The phases composition of TiCN/Al-30Si-5Cu composite coating were α-Al, β-Si, θ-Al 2 Cu, β-Ti, TiC, TiN, TiN 0.8 C 0.2 , TiO 2 , as well as amorphous CN X and residual graphite. The TiC-dominated ceramic phases and β-Si were uniformly distributed in the coating, which were tightly bound to the α-Al matrix. Because of the exceptionally rapid cooling rate during the coating preparation, a minor amount of submicron Si particles were also generated. The microhardness, elasticity modulus, and fracture toughness of TiCN/Al-30Si-5Cu composite coating appeared improvements compared to those of Al-30Si-5Cu coating. The TiCN/Al-30Si-5Cu composite coating exhibited smoother friction coefficient curve, along with lower friction coefficient and wear volume in comparison to the Al-30Si-5Cu coating. This suggested that the ceramic reinforcing phases in-situ synthesized led to a notable advancement in the wear resistance of the TiCN/Al-30Si-5Cu composite coating. The wear resistance of TiCN/Al-30Si-5Cu composite coating demonstrated an increasement of 78.3 % over the substrate and 28.2 % over the Al-30Si-5Cu coating. Under the dry friction test conditions outlined in this study, the wear mechanism of the TiCN/Al-30Si-5Cu composite coating included abrasive wear and fatigue wear, coupling with a minimal amount of oxidative wear.

A Novel Approach of In-Situ Synthesis of WC Particulate-Reinforced Fe-30Ni Ceramic Metal Coating

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Microstructure and Tribology Behaviors of In-Situ WC/Fe Carbide Coating Fabricated by Plasma Transferred Arc Metallurgic Reaction

Improving Wear Resistance and Friction Stability of FeNi Matrix Coating by In-Situ Multi-Carbide WC-TiC Via PTA Metallurgical Reaction

Preparation of Ultra-Fine WC-Co Cermet and Its Wear Behavior

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

Preparation and characterization of high-performance in-situ synthesized WC reinforced nickel-based coatings

Study of Microstructure of Coarse-grain Tungsten Carbide Composite Produced by In-Situ Metallurgy Reaction

Effects of Ti Addition on Microstructure and Tribological Properties of in Situ Composite Carbide Coating WC-TiC/FeNi Fabricated by Plasma Transferred Arc Metallurgical Reaction

Sedimentation Suppression and Precipitation Regulation of WC-reinforced Particles in Plasma Arc Deposited Ni-based Coatings Via an Alternating Magnetic Field

Influence of WC grain size on the microstructure and wear property enhancement of 18Ni300 coatings

Wear Properties of Plasma Transferred Arc Fe-based Coatings Reinforced by Spherical WC Particles

Fe–W–C Thermodynamics and in Situ Preparation of Tungsten Carbide-Reinforced Iron-Based Surface Composites by Solid-Phase Diffusion

Preparation,Microstructure and Performance of WC-Ni Reinforced Fe-based Graded Coating

Microstructure and high-temperature wear properties of in situ TiC composite coatings by plasma transferred arc surface alloying on gray cast iron

Microstructure evolution and high temperature wear resistance of in-situ synthesized carbides reinforced NiCoFeCrSiMo high entropy alloy coatings fabricated by laser cladding

A novel approach to fabricate WC reinforced W Cu composites via MSC and infiltration method

Microscopic Characteristics and Properties of Fe-Based Amorphous Alloy Compound Reinforced WC-Co-Based Coating via Plasma Spray Welding

Microstructure and tribological properties of Al-30Si-5Cu composite coating reinforced with ceramic phases synthesized in situ by plasma spraying

Effects of WC mass fraction on microstructure and tribological behavior of plasma sprayed FeMnCoCr–WC coatings

Wear Behavior of Plasma Sprayed Ni-WC Composite Coatings