Abstract:Abstract High density polyethylene (HDPE) is widely used in city water and gas piping system and even in nuclear engineering for its excellent properties in flexibility, impact resistance, aging and corrosion resistance, reliable connection, long service life. It is generally believed that the typical failure mode of PE pipe under long-term static pressure load is the slow crack growth (SCG) caused by creep crack initiation (CCI) and creep crack growth (CCG), which is a kind of quasi-brittle failure. Scratching often occurs during PE pipe installation due to the drag of pipe without any protection, which would leave axial cracks as the initial defect. This would harm the long term performance of pressurized HDPE pipe. In the present work, the creep crack kinetics was experimentally determined in term of C* integral, and then CCG behavior of PE pipe with axial semi-elliptical crack was discussed. With the help of a CARE electronic universal testing machine and DIC displacement measuring system, creep tests are performed with smooth bar specimen of PE100 pipe parent material. And the stationary creep law parameters were determined. The crack opening displacement (COD) rates were determined by creep cracking test with cracked round bar specimen. With the help of compliance calibration tests, the COD curves were changed into crack propagation curves and the creep crack kinetics was eventually determined in term of C* integral. By assuming an semi-elliptical crack front with nearly the same C* integral, the creep crack propagation was predicted with the determined crack kinetics. And the allowable initial crack size was also determined for the PE pipe discussed. Compared with that determined in terms of SIF, current study yields much margin for the allowable initial crack.

Analysis on the Long-Term Hydrostatic Strength of Kevlar Fibre Reinforced Flexible Pipe

Prediction of Ductile Rupture Failure Life of HDPE Pipe

Investigation On Creep-Rupture Failure Time Of Hdpe Pipe Under Hydrostatic Pressure

Investigation on Failure Mode of Short Carbon Fiber Reinforced Thermoplastic Composites Joints of Non-metallic Pipeline

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Failure analysis of a reinforced thermoplastic pipe used in an oil transportation system

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

A Theoretical Method To Estimate The Fatigue Life Of Tensile Armors Of Flexible Pipes

Analysis of the Mechanical Properties of a Fibreglass Reinforced Flexible Pipe (FGRFP)

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

CCG of PE100 and Life Prediction of PE Pipe With Axial Semi-Elliptical Crack

Failure Behavior Analysis of Steel Strip–reinforced Flexible Pipe under Combined Tension and Internal Pressure

Investigation On Mechanical Properties Of Fiberglass Reinforced Flexible Pipes Under Bending

Structural Analysis of Fibreglass Reinforced Bonded Flexible Pipe Subjected to Tension

Strain Rate-Dependent Hyperbolic Constitutive Model for Tensile Behavior of PE100 Pipe Material

The performance and causes of failure of polyethylene pipes subjected to constant and fluctuating internal pressure loadings

Tensile strength of the unbonded flexible pipes

Behavior of Flexible Pipe Subjected to Internal Pressure

Analysis of load carrying performance for glass fiber reinforced thermoplastic composite pipe under different in-service conditions

Analysis of the Mechanical Behaviors of Fiber Reinforced Unbonded Flexible Pipe Under Combined Load