Abstract:The implementation of vertically stacked gate-all-around nanosheet FET (GAA NSFET) may help improve the performance of static random access memory (SRAM) for the design flexibility with variable NS widths. However, the method that often relies on the increasing of device width for higher driving current is to cause an increased SRAM cell area and degrade the scalability of transistor in advanced nodes. In this article, an innovated SRAM bitcell design with hybrid integration of Si NSFET and Si/SiGe super-lattice FinFET (SL-FinFET) in one SRAM cell is proposed for less area and improved performance in 3 nm and beyond nodes. Under the same footprint, p-type SL-FinFET delivers obviously enhanced driving current compared with NSFET and it may yield improved circuit performance for the SRAM cell with natural transistor ratio. The integration process method and the layout schemes for two kinds of typical 6T-SRAM cells, including the high-robustness cell (HI-R Cell) and the high-speed cell (HI-S Cell) with the hybrid integration method, are presented for optimizing high-density (HD) and high-performance (HP) SRAM. As compared with the HD NSFET SRAM cell, the HD HI-R Cell achieves 16.2% improvement in read static noise margin (RSNM) and the HD HI-S Cell achieves 21.6% reduction in read time and 28.6% reduction in write time. The HP hybrid integrated cell even pushes the SRAM cell performance arriving to the theoretical limits of regular NSFETs. Moreover, the hybrid integration scheme may provide another revolutionary method to optimize transistor ratio by adjusting the height of SiGe thickness in the transistors.

Highly Flexible SRAM Cells Based on Novel Tri-Independent-gate FinFET

Independently-Controlled-Gate FinFET 6T SRAM Cell Design for Leakage Current Reduction and Enhanced Read Access Speed

A FinFET-based static memory cell optimized for stability and low power consumption

A FinFET based low-power write enhanced SRAM cell with improved stability

Hybrid Integration of Gate-All-Around Stacked Si Nanosheet FET and Si/SiGe Super-Lattice FinFET to Optimize 6T-SRAM for N3 Node and Beyond

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

A FinFET‐Based Low‐Power Static Random Access Memory Cell With Improved Stability

SRAM cell with asymmetric pass-gate nMOSFETs for embedded memory applications

A Novel TFET-MOSFET Hybrid SRAM for Ultra-Low-Power Applications

Reverse Bias Current Eliminated, Read-Separated, and Write-Enhanced Tunnel FET SRAM

Half-Select Disturb-Free 10T Tunnel FET SRAM Cell with Improved Noise Margin and Low Power Consumption

Novel high-performance SRAM cell design using 9T

On the SRAM with Comb-Shaped Nano FETs Advancing to 3 Nm Node and Beyond

Ultraflexible Monolithic Three-Dimensional Static Random Access Memory.

A New 10t Sram Cell with Improved Read/Write Margin and No Half Select Disturb for Bit-Interleaving Architecture

Novel Tri-Independent-gate FinFET for Multi-Current Modes Control

A FinFET Integrated STT-MRAM with Triple Balanced Access Strategy.

Lanthanum Doped Zirconium Oxide (LaZrO2) High-k Gate Dielectric FinFET SRAM Cell Optimization

Hybrid MOSFET-TFET 11T SRAM Cell with High Write Speed and Free Half-Selected Disturbance

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy